IoT Based Monitoring and Control System for Three-phase Induction Motor
Technology has been developing throughout the world as system moved from manual to smart system. This project is on the smart control panel for controlling the three phase induction motor . Three-phase Induction motor is one of the most common types of electrical machines with vast amount of applica
Project Title
IoT Based Monitoring and Control System for Three-phase Induction Motor
Project Area of Specialization
Project Summary
Technology has been developing throughout the world as system moved from manual to smart system. This project is on the smart control panel for controlling the three phase induction motor . Three-phase Induction motor is one of the most common types of electrical machines with vast amount of applications in the entire power system all over the world due to its various advantages such as low starting power, lower maintenance cost etc.
The variable frequency drive controls the speed of the machine to maintain its constant speed characteristics, reduce power line disturbances, demands lower power on start, help in controlling operating speed, acceleration and adjust torque. Control element used here is speed control with IOT based remote data acquisition technique for automatic as well as a manual control using a GUI.
The potential socioeconomic of the Internet of Things (loT) in the Industrials space is estimated to be tremendous. These connected devices will bring about a huge increment in the general multifaceted nature of frameworks. While the pace of loT selection by Industrials is on the ascent, a ton of vulnerability stays with respect to the availability of associations and the effect of reception. This could be due to lack of vision from leadership, lack of resources, and also lack of capabilities required for successful adoption.
Project Objectives
Figure 1:Objective Diagram for IoT based Speed Control of Induction Motor
Project Implementation Method
- AC is rectified to pulsating DC
- The pulsating DC voltage is regulated using filter.
- From Webpage Input Desired Frequency (20-60Hz)
- Controller receive signal of desired frequency and Generate PWM.
- Using this DC voltage converting back into AC but with variable Frequency.
- Measuring RPM.
- Sending Data to webpage.
- Monitoring using IoT.
Figure 2:Variable Frequency Drive Layout
Figure 3:Block Diagram
Figure 4:Block Diagram for Speed Control of Induction Motor
Benefits of the Project
- Local production of VFD will introduce new dimensions of living standard
- Domestic manufacturing will help local training to produce skilled persons
- Local manufacturing decreases the cost of VFD
- Consumption of manpower will increase living standards
- Available in wide range of speed, torque and power.
- Quieter operation at low load.
- Reduced complaints and lower operating cost.
- Improved control process.
- Typical payback is less than 2 years.
- Flexible control characteristics.
- Low maintenance cost
- Energy saving
- Productivity
- Higher quality
Technical Details of Final Deliverable
- To design IOT based control and monitoring of three phase induction motor
- Three phase inverter
- Three phase filter
- To design IOT based GUI
Final Deliverable of the Project
Core Industry
Other Industries
Core Technology
Other Technologies
Sustainable Development Goals
Required Resources
| Item Name | Type | No. of Units | Per Unit Cost (in Rs) | Total (in Rs) |
|---|---|---|---|---|
| Three Phase Motor | Equipment | 1 | 28600 | 28600 |
| Arduino Mega | Equipment | 2 | 1400 | 2800 |
| Power MOSFET(IRF3205) | Equipment | 8 | 60 | 480 |
| IGBT | Equipment | 8 | 240 | 1920 |
| Gate Driving IC(IR2112) | Equipment | 8 | 190 | 1520 |
| Op-amp | Equipment | 10 | 30 | 300 |
| 12 Volt Charger | Equipment | 1 | 540 | 540 |
| Power Diode (10A10) | Equipment | 6 | 20 | 120 |
| Node MCU | Equipment | 2 | 920 | 1840 |
| Power Cable | Equipment | 2 | 110 | 220 |
| AC Connector | Equipment | 2 | 25 | 50 |
| Step up Transformer | Equipment | 2 | 3000 | 6000 |
| Transportation | Miscellaneous | 1 | 3000 | 3000 |
| Breadboard | Equipment | 4 | 120 | 480 |
| PCB Bord | Equipment | 1 | 250 | 250 |
| PCB Solution | Equipment | 1 | 200 | 200 |
| Data Cable | Equipment | 1 | 80 | 80 |
| Capacitors(Different Types) | Equipment | 1 | 1200 | 1200 |
| Miscellaneous | Miscellaneous | 1 | 7000 | 7000 |
| Total in (Rs) | 56600 |
If you need this project, please contact me on contact@adikhanofficial.com
Design And Development of a DC Servo motor Trainer
The motivation behind this project in the indegnious development of low cost but highly in...
Smart building based on IOT
Smart building based on IOT It is a project of building management system.Our project wil...
Adaptation of Smart contract in supply chain management using IOT
Efficient tracking of shipments is critical in managing global trade and logistics activit...
Active Chat monitoring and Suspicious Chat Detection
The increasing demand of security for chat communication is a large scale problem wh...
donating system
Background This system provides the solution for two type of users, ?Donor? &...