Wireless power transmission using slayor exciter circuit with tesla coil

ABSTRACT: Wireless power transmission is all about the transference of power without using wires. The efficient midrange power can be transmitted to any device which uses that range of power by the technique that is used in this project. Wireless Power Transfer (WPT) is proc

Project Title

Wireless power transmission using slayor exciter circuit with tesla coil

Project Area of Specialization

Electrical/Electronic Engineering

Project Summary

ABSTRACT:

Wireless power transmission is all about the transference of power without using wires. The efficient midrange power can be transmitted to any device which uses that range of power by the technique that is used in this project. Wireless Power Transfer (WPT) is process of transferring power from one circuit on to another without passing through any man made conductive elements interconnecting them. There are two kinds of the WPT technologies: near field technique and far field technique. Near field technique uses inductive coupling, resonance inductive coupling and air ionization. Far field techniques can be achieved through microwave power transmission and LASER power transmission. However, the efficiency is low as of now and researchers have progressed less in this field to materialize the commercial technology. Thus we have covered the possible ways to harness the power without wires from many researches carried out so far. The advantages, disadvantages, biological impacts and its applications are presented.

 INTRODUCTION:

Wirelss power transmission is very important in this era.As we know that interconnections of wires creates hazard and give loss to to our power system.With wireless electricity , efficiency is the more significant parameter.We also use  slayer circuit (or air cored transformer) which is self resonating tesla coilthat produces high amount of voltage . It resonates itself without complicated circuitry at same high voltage and frequency oscillating waves.It is deemed as powerful hardware based design that gives exposure of power transmission with combinztion of electrical and electronics principle.Circuit parameter determines wirelss power transmission over close vicinity .Our project is capable of lighting up fluorescent bulbs , light emitting diodes, neon light bulbs by electromagnetic field around the coil.The tesla transformer , which is considered to be fascinating device and is capable of creating spectacular effects by generating high voltages pulses with several megavolts of amplitude.Electrical discharge is also emitted easily by it and it extends for several meters and remind natural lightning. Tesla transformer is now a days very known more than a century to scientific research and also used in several applications.

 PROBLEM STATEMENT:

The main idea behind wireless power transfer using slayer exciter circuit with tesla coil is to get rid of landscape wires ,cables and transmitting towers.The project is also helful in avoiding power theft, power failure due to short circuit and fault on cables and transmission.Our project also highlights inefficient forms of power transmission.

Project Objectives

Following are the main objectives of this research:

• To develop an inexpensive method to wirelessly transmit electrical energy
• To transmit power in terms of low current , high frequency / high voltage alternating current electricity
• To create an awareness of electrical power transmission wirelessly
• To provide an economic mean of safe power transmission

Project Implementation Method

RESEARCH METHODOLOGY:

STEP#01:Firsly,when we turn on circuit, R drives the base of transistor Q.

STEP#02: Q turns on and drives current into primary of transformer.

STEP#03: the created magnetic field drives the secondary of transformer.

STEP#04: Secondary voltage wants to grow large .but small stray capacitance on the output resists the change.

STEP#05:Diode D prevents base voltage to fall more than 0.7v below ground, which in turrn pushes the output of secondary high.

STEP#06:Transistor turn off and so magnetic field starts to reduce .

STEP#07:  In last,the base voltage rises again and Q turns on and cycle repeats.

Benefits of the Project

RESEARCH BENEFITS:

• An electrical distribution system based on this method would eliminate the need for inefficient, costly and capital intensive grid of cables, towers and substations.

• System would reduce cost of electrical energy used by consumer.

• More efficient energy distribution systems and sources are needed by both developed and under developed nations.

• No transmission and distribution losses due to wireless at any terrestrial distance.

Technical Details of Final Deliverable

RESEARCH TECHNICAL DETAILS:

• Our final year project will help reduce environmental impacts because wires when carry more current , gets heated and impact the invironment.
• The  work of this project will benefit our WAPDA to cope up with electricity theft if done on broader level.
• The project also helps to reduce the expenses of costly wires used for transmission.
• The work when completed , will help other students to get benefit from it and improve its efficiency in near time.

Final Deliverable of the Project

Hardware System

Core Industry

Energy

Other Industries

Others

Core Technology

Clean Tech

Other Technologies

Others

Sustainable Development Goals

Affordable and Clean Energy

Required Resources

If you need this project, please contact me on contact@adikhanofficial.com