Direct Current (DC) circuit breaker is an important element for the stable operation of DC power systems. Conventional DC circuit breakers have a slow response due to their mechanical nature and there is a risk of high damage. Therefore, this project proposes a new Solid State DC Circuit Breaker (SS
Solid State DC Circuit Breaker
Direct Current (DC) circuit breaker is an important element for the stable operation of DC power systems. Conventional DC circuit breakers have a slow response due to their mechanical nature and there is a risk of high damage. Therefore, this project proposes a new Solid State DC Circuit Breaker (SSDCCB) suitable for DC grids. It has a low semiconductor conduction loss, quick reclosing, and rebreaking capabilities. It can interrupt and clear the fault within 1[ms].
Most of the conventional SSDCCBs cannot perform the operating duty and are not economical because many SCR is required. The proposed SSCB has a quick reclosing and rebreaking capability. Suitable for domestic and commercial purposes at a rated power of 0.55[kW] and voltage of 110[V] at a rated current of 5[A].
Since sensitive loads and DC distribution are used widely, the DC SSCBs are essential to maintain the high power quality of the DC grid. Therefore, this project proposes a new DC SSCB that has low conduction loss due to its main thyristor, simple structure, and good characteristic of rapid breaking within 300[usec] of short circuit faults. Furthermore, the manufacturing cost of the proposed DC SSCB can be reduced thanks to lower-rated devices and a reduced number of auxiliary SCRs. It can also perform the operating duty of reclosing and rebreaking since the recharging operation of the capacitor is possible regardless of the fault state on the load side.
Our project is hardware integration-based designing of a Solid State DC circuit breaker.
We will use the following software to implement our strategy
DC power system is more efficient than AC but still, short circuit faults and sags/swells are there.
There is a lack of techniques for the stability of the DC power system, so the system suffers damage due to fire, arc, or spark.
Two basic techniques based on the mechanism of faults clearance by CB in the DC system are,
Mechanical Circuit Breakers are capable of breaking faults in several milli-seconds causing damage with slow break capability.
In contrast, SSDCCB can break fault within one millisecond at a lower fault current level with fast-break capability.
SCR
INDUCTORS
CAPACITORS
DIODES RESISTORS Stepdown Transformer (220V/12V) Bridge Rectifier IC (DI106) Capacitor (470F/16V) LM7815 Regulator IC TLP250 Optocoupler
| Item Name | Type | No. of Units | Per Unit Cost (in Rs) | Total (in Rs) |
|---|---|---|---|---|
| Stm32F401 | Equipment | 1 | 1000 | 1000 |
| Stepdown Transformer | Equipment | 1 | 850 | 850 |
| Bridge Rectifier IC | Equipment | 1 | 200 | 200 |
| LM7815 IC | Equipment | 1 | 40 | 40 |
| TLP250 Optocoupler | Equipment | 1 | 130 | 130 |
| Capacitor 470 F/16 V | Equipment | 1 | 800 | 800 |
| Inductor 20 micro H | Equipment | 1 | 10 | 10 |
| Inductor 400 micro H | Equipment | 1 | 10 | 10 |
| Capacitor 100 F | Equipment | 1 | 600 | 600 |
| SCR SKTT 56/12E | Equipment | 1 | 6600 | 6600 |
| Diode SKKD 81/16E | Equipment | 1 | 3300 | 3300 |
| Total in (Rs) | 13540 |
Our E-plantation system is consisting of two phases. In the first phase, we design the sys...
The aim of this system is to minimize the time consumption in maintaining the records of U...
Donor have choice to donate their respective blood group. Blood is transfused directly fro...
The Project is "Women Safety Mobile Application". The application is intended to maxi...