Smart Office Energy Management using Grid Connected Hybrid Renewable Energy
this project is designed specially for the hillys and mountains areas where there is alot of issue regarding electricity in homes and in offices. we designed this projects for office management system, in this projects we have three sources out of these three sources two sources are hybr
2025-06-28 16:29:22 - Adil Khan
Smart Office Energy Management using Grid Connected Hybrid Renewable Energy
Project Area of Specialization Internet of ThingsProject Summarythis project is designed specially for the hillys and mountains areas where there is alot of issue regarding electricity in homes and in offices.
we designed this projects for office management system, in this projects we have three sources out of these three sources two sources are hybrid energy which is solar and wind energy and the thired source is power supply or wapda.
in this project we have also a management system which is to control office appliances. we have an iot app which will show the power, volatge and current status.
- Learning power consumption patterns.
- Forecast power consumption and forecast power generation.
- Office Appliances control using forecast data.
- this project is implemeneted both on softwere and hardware.
- in softwere we use proteus for designing and simulation of MPPT ,PWM controller and as well as the DC to AC convertor.
- in hardware we made MPPT, PWM controller on PCB while the invertor is made on the vero board.
- this one time investment due to which their will be saving of cost in bills.
- their will no tension or worried about electricity shut down.
- its a friendly project which has no effect on environment.
- its basic and the main benefit is to overcome the crisies of electricity.
the final deliverable is basically a prototype which has two sources solar and wind, and for this two sources there is two controller thats is MPPT and PWM, which is used to charge the batteries after that their is an invertor used which to convert the DC volatges of into AC after this process their is step up and stepdown transfromer used. An esp32 module is also used with iot section.
Final Deliverable of the Project Hardware SystemCore Industry Energy Other IndustriesCore Technology Internet of Things (IoT)Other TechnologiesSustainable Development Goals Affordable and Clean Energy, Partnerships to achieve the GoalRequired Resources| Item Name | Type | No. of Units | Per Unit Cost (in Rs) | Total (in Rs) |
|---|---|---|---|---|
| Total in (Rs) | 26800 | |||
| Resistor | Equipment | 30 | 2 | 60 |
| Capacitor Nano | Equipment | 10 | 5 | 50 |
| Capacitor Big | Equipment | 10 | 25 | 250 |
| Power Mosfet | Equipment | 20 | 80 | 1600 |
| diodes | Equipment | 10 | 1 | 10 |
| Inductors | Equipment | 8 | 30 | 240 |
| Arduino nano | Equipment | 2 | 1300 | 2600 |
| step up transformer | Equipment | 1 | 1500 | 1500 |
| stepdown transformer | Equipment | 1 | 120 | 120 |
| Bridge Rectifier | Equipment | 1 | 30 | 30 |
| esp32 | Equipment | 1 | 800 | 800 |
| current transformer | Equipment | 1 | 210 | 210 |
| current sensor | Equipment | 2 | 490 | 980 |
| lcd display | Equipment | 2 | 350 | 700 |
| relay | Equipment | 1 | 160 | 160 |
| load | Equipment | 2 | 250 | 500 |
| pcb board | Equipment | 3 | 80 | 240 |
| veroboard | Equipment | 1 | 50 | 50 |
| solar panel | Equipment | 1 | 8000 | 8000 |
| wind system | Equipment | 1 | 5000 | 5000 |
| battery 12v | Equipment | 1 | 2200 | 2200 |
| protyype board | Equipment | 1 | 1500 | 1500 |