Adil Khan 1 year ago
AdiKhanOfficial #FYP Ideas

Hybrid Renewable energy System

Now a day?s electricity is most needed facility for the human being. All the conventional energy resources are depleting day by day. So we have to shift from conventional to non-conventional energy resources. In this the combination of two energy resources is takes place i.e. wind and so

Project Title

Hybrid Renewable energy System

Project Area of Specialization

Electrical/Electronic Engineering

Project Summary

Now a day’s electricity is most needed facility for the human being. All the conventional energy
resources are depleting day by day. So we have to shift from conventional to non-conventional
energy resources. In this the combination of two energy resources is takes place i.e. wind and
solar energy. This process reviles the sustainable energy resources without damaging the nature.
We can give uninterrupted power by using hybrid energy system. Basically this system involves
the integration of two energy system that will give continuous power. Solar panels are used for
converting solar energy and wind turbines are used for converting wind energy into electricity.
This electrical power can utilize for various purpose. Generation of electricity will be takes place
at affordable cost.

Project Objectives

The main objectives of our project are to generate a low cost renewable energy. In this regard we will generate energy from solar panels and wind turbines. In this way the renewable energy will produce hence the dependency on fossil fuels will decrease. Which would help to reduce pollution from the environment.

Project Implementation Method

The radiations from sun falls on the Solar panel as a result the current is produced. This current is stored in battery via charge controller.
 On the other hand the wind strikes on the blades of rotor. The rotor is connected to main shaft, which spins a generator and generates electricity. This current is also stored via charge controller in battery.The inverter changes the direct current into alternating current.This alternating current is then supplied to the electric load.

Benefits of the Project

Reserves of fossil fuels are decreasing day by day, by using renewable energy the consumption and dependence upon fossil fuels will decrease. Hence demands and prices of petroleum will decrease.
Burning of fossil fuels causes pollution in environment in the form of different hazardous gases. These gases causes health issues, hence use of renewable energy would help to decrease the environmental pollution.
Installation and maintenance of this system will create job opportunities.
Maintenance cost of this system is low hence it won’t put much burden on economy of the country if it would be installed at government level.
It can be used at domestic level so it can be helpful to get rid of high electricity bills.

Technical Details of Final Deliverable

Design and fabrication of hybrid solar wind tree.
Analysis of hybrid solar and wind energy for effective working of charge controller.
Designing of inverter.Combining of individual components for making final hybrid wind and solar power system.

Final Deliverable of the Project

Hardware System

Core Industry

Energy

Other Industries

Core Technology

Others

Other Technologies

Sustainable Development Goals

Affordable and Clean Energy

Required Resources

Item Name Type No. of Units Per Unit Cost (in Rs) Total (in Rs)
Arduino Equipment26501300
Steel sheet Equipment110001000
Mosfets Equipment3200600
Solar panels Equipment220004000
Metal rods Equipment110001000
Metal pipe Equipment120002000
Pcb sheet Equipment110001000
Capacitor Equipment2025500
Inducator Equipment52001000
Diodes Equipment2050010000
DC motors Equipment62501500
LED Equipment205100
Battery Equipment210002000
Bus fairs And shipping charges Miscellaneous 115001500
Blacksmith Miscellaneous 150005000
Transformer Equipment1300300
Switch buttons Equipment550250
Heatsink Equipment650300
Bulbs and holders Equipment3300900
Wires Equipment1500500
Stationary Miscellaneous 115001500
Printing Miscellaneous 102002000
Solder Equipment1500500
Multimeter Equipment115001500
Total in (Rs) 40250
If you need this project, please contact me on contact@adikhanofficial.com
0
182
Quality Control Inspection with Computer Vision

The project Quality Control Inspection with Computer Vision describes the design of automa...

1675638330.png
Adil Khan
1 year ago
Blockchain Based Car Rental Application

Summary: We are living in the era of revolution where most of the work could be done using...

1675638330.png
Adil Khan
1 year ago
HandiText Sign Language Recognition

Project focuses on translation of sign language gestures into Text or Audio, allowing othe...

1675638330.png
Adil Khan
1 year ago
Smart blood donation application

In the case of an emergency crisis, it is very difficult for a patients and their relative...

1675638330.png
Adil Khan
1 year ago
Design and Implementation of Self-Synchronized Inverter Connected with...

The proposed single phase grid connected inverter is capable of dealing power with minimum...

1675638330.png
Adil Khan
1 year ago