Smart Office Energy Management using Grid Connected Hybrid Renewable Energy

this project is designed specially for the hillys and mountains areas where there is alot of issue regarding electricity in homes and in offices. we designed this projects for office management system, in this projects we have three sources out of these three sources two sources are hybr

Project Title

Smart Office Energy Management using Grid Connected Hybrid Renewable Energy

Project Area of Specialization

Internet of Things

Project Summary

this project is designed specially for the hillys and mountains areas where there is alot of issue regarding electricity in homes and in offices.
we designed this projects for office management system, in this projects we have three sources out of these three sources two sources are hybrid energy which is solar and wind energy and the thired source is power supply or wapda.
in this project we have also a management system which is to control office appliances. we have an iot app which will show the power, volatge and current status.

Project Objectives

• Learning power consumption patterns.
• Forecast power consumption and forecast power generation.
• Office Appliances control using forecast data.

Project Implementation Method

• this project is implemeneted  both on softwere and hardware.
• in softwere we use proteus for designing and simulation of MPPT ,PWM controller and as well as the DC to AC convertor.
• in hardware we made MPPT, PWM controller on PCB while the invertor is made on the vero board.

Benefits of the Project

• this one time investment due to which their will be saving of cost in bills.
• their will no tension or worried about electricity shut down.
• its a friendly project which has no effect on environment.
• its basic and the main benefit is to overcome the crisies of electricity.

Technical Details of Final Deliverable

the final deliverable is basically a prototype which has two sources solar and wind, and for this two sources there is two controller thats is MPPT and PWM, which is used to charge the batteries after that their is an invertor used which to convert the DC volatges of into AC after this process their is step up and stepdown transfromer used. An esp32 module is also used with iot section.

Final Deliverable of the Project

Hardware System

Core Industry

Energy

Other Industries

Core Technology

Internet of Things (IoT)

Other Technologies

Sustainable Development Goals

Affordable and Clean Energy, Partnerships to achieve the Goal

Required Resources

If you need this project, please contact me on contact@adikhanofficial.com