Secondary control in dc microgrid
We are working on secondary control in dc microgrid, the objective of this project is to ensure equal load sharing using SMC(Sliding Mode Control) and PI controller. In this project, we have to design DC microgrid using different converters and renewable sources. We are moving to the DC syst
Project Title
Secondary control in dc microgrid
Project Area of Specialization
Project Summary
We are working on secondary control in dc microgrid, the objective of this project is to ensure equal load sharing using SMC(Sliding Mode Control) and PI controller.
In this project, we have to design DC microgrid using different converters and renewable sources.
We are moving to the DC system because nowadays all types of equipment and devices are on DC source, in our home premises are also working on DC nonetheless the generation is in AC.
that's why we are making the DC system to provide desirable power at low losses.
Project Objectives
The objective of this project is to ensure equal load sharing in the dc system and regulate the low voltages.
As we know load changes at any instant so due to this the voltages down from the nominal voltages and the load will more be drawn from one source. To stabilize this change we're using SMC and PI controller to share the equal load and regulates the voltages among the different sources.
Project Implementation Method
The implementation of the project is on the DC system and also on the AC system, using electronic converters all sources will be allocated on the DC grid and will be provided an equal amount of energy from all sources.
Benefits of the Project
The benefits of the projects are, there are more efficient than the ac systems. low losses the AC. easy to connect more than one sources as compared to ac systems.
Technical Details of Final Deliverable
We are using electronic converters to regulates the voltages like boost. and SMC is for Current control and PI is for voltage control
Final Deliverable of the Project
Type of Industry
Technologies
Sustainable Development Goals
Required Resources
| Item Name | Type | No. of Units | Per Unit Cost (in Rs) | Total (in Rs) |
|---|---|---|---|---|
| IGBT GB30 | Equipment | 30 | 90 | 2700 |
| Power resistances | Equipment | 70 | 30 | 2100 |
| Mosfets IRF540 | Equipment | 30 | 70 | 2100 |
| Power diode | Equipment | 25 | 45 | 1125 |
| Capacitors | Equipment | 4 | 1000 | 4000 |
| Inductors | Miscellaneous | 4 | 500 | 2000 |
| Heat sinks | Miscellaneous | 30 | 100 | 3000 |
| other | Equipment | 10 | 1000 | 10000 |
| Total in (Rs) | 27025 |
If you need this project, please contact me on contact@adikhanofficial.com
Deep Learning for Electromyographic Hand Gesture Signal Classification...
In recent years, deep learning algorithms have become increasingly more prominent for thei...
Design a Synchronoues motror used in electrical vehicles
The project we are aiming to create focuses on the designing of a permanent magnet synchro...
SMART MOTOR BIKE
Project Summary We will be having a motor bike with self-start option in it and we will co...
Variable Flow Control through VFD for Level Precision & Energy sav...
In almost every industrial facility, there is always a fluid pumping system depending upon...
Smart Electric Switch Board System For EE Department
Internet of thing (IOT) is an advancement in technology in the sense various ele...