Remote health monitoring system based on IOT

Project Title

Remote health monitoring system based on IOT

Project Area of Specialization Internet of ThingsProject Summary

This project aims to design and develop and IoT based Health Monitoring System which monitors health features of a remote user. The statistics to be monitored are oxygen saturation levels, temperature. Sensors will be used for tracking user’s vitals and data will be processed using a microcontroller. By the use of internet, in case of an emergency, a signal would be sent to the desired receiver showing the numeric representation of vitals so proper action could be taken. Information will also be stored online for viewing later. Such a scheme is useful for monitoring health of the elderly, distinct users or the cases when hospitals are over burdened by patients.

Project Objectives

Implementation of Hardware/Software Integrated system for remote health monitoring through the following stages

1. UnderstandingIOT and identification of appropriate hardware
2. Detecting vitals using sensors
3. Development of algorithm for processing, displaying and transmission of data.
4. Data displaying on the internet

Project Implementation Method

The project is comprised of three main parts. The first part is detection of patient’s vitals using sensors, second for sending data to cloud storage and the last part was providing the detected data for remote viewing. Remote viewing of the data enables a doctor. The proposed architecture will collect the sensor data through Arduino microcontroller and relay it to the cloud where it is processed and analyzed for remote viewing. Feedback actions based on the analyzed data can be sent back to the doctor or guardian r guardian to monitor a patient’s health progress away from hospital premises.

Benefits of the Project

The Internet of Things (IoT) concepts have been widely used to interconnect the available medical resources and offer smart, reliable, and effective healthcare service to the patients. Health monitoring for active and assisted living is one of the paradigms that can use the IoT advantages to improve the patient’s lifestyle. The aim of the project was to come up with a Remote Health Monitoring System that can be made with locally available sensors with a view to making it affordable if it were to be mass produced.

Technical Details of Final Deliverable

Fully functinal HW/SW Intergrated system for health monitoring

Final Deliverable of the Project HW/SW integrated systemCore Industry HealthOther Industries Medical Core Technology Internet of Things (IoT)Other Technologies Cloud InfrastructureSustainable Development Goals Good Health and Well-Being for People, Sustainable Cities and Communities, Partnerships to achieve the GoalRequired Resources

Item Name	Type	No. of Units	Per Unit Cost (in Rs)	Total (in Rs)
			Total in (Rs)	69550
Arduino UNO	Equipment	5	2000	10000
Arduino Mega	Equipment	2	4000	8000
Node Mcu Esp 8266	Equipment	4	1000	4000
Esp 8266	Equipment	4	500	2000
Max 30102	Equipment	4	1000	4000
LM35	Equipment	4	200	800
LM324	Equipment	6	100	600
IR sensor	Equipment	2	100	200
Bread board	Equipment	5	200	1000
LCD Display 16x2	Equipment	2	500	1000
oled panel	Equipment	2	1000	2000
Pulse sensor	Equipment	2	800	1600
Resistors	Equipment	20	10	200
Capacitor	Equipment	20	30	600
Variable resistor	Equipment	5	50	250
Bluetooth Module	Equipment	2	650	1300
Raspberry pi	Equipment	2	16000	32000