Adil Khan 9 months ago
AdiKhanOfficial #FYP Ideas

PV sun tracking controller and IOT based monitoring system

Now a day?s solar power is very helpful in our everyday life. This power is used in many ways such as homemade electrical appliances, vehicles, satellites and industries etc. In simple terms this project?s objective is to have a solar panel outputting its maximum possible power all day long, this oc

Project Title

PV sun tracking controller and IOT based monitoring system

Project Area of Specialization

Electrical/Electronic Engineering

Project Summary

Now a day’s solar power is very helpful in our everyday life. This power is used in many ways such as homemade electrical appliances, vehicles, satellites and industries etc. In simple terms this project’s objective is to have a solar panel outputting its maximum possible power all day long, this occurs when the panel tracks the sun and rotates the accordingly, to receive sunlight to the fullest extent always during the day time. Using IOT for supervising solar power generation can greatly enhance the performance, monitoring and maintenance of the plant. With advancement of technologies the cost of renewable energy equipment is going down globally encouraging large scale solar plant installations.

Project Objectives

Due to the shortage of electricity, the mankind always looked for the most available and environmental friendly type of the electric power in the way of development . Renewable energy is an energy which comes from natural resources such as sunlight, wind, tides, hydro, biomass and geothermal, which are naturally replenished The preeminent goal of this project is to elucidate about the maximum power generation through solar tracking system and it has been noticed that the yield of solar cell is more than static tracking system. The furthermore supremacy add on points from our project is that it does not affect the environment, shrinkage the cost of fossil fuels. This proposal  basically consists of two sections, software programming which is interlaced with hardware components.

Due to the shortage of electricity, the mankind always looked for the most available and environmental friendly type of the electric power in the way of development . Renewable energy is an energy which comes from natural resources such as sunlight, wind, tides, hydro, biomass and geothermal, which are naturally replenished The preeminent goal of this project is to elucidate about the maximum power generation through solar tracking system and it has been noticed that the yield of solar cell is more than static tracking system. The furthermore supremacy add on points from our project is that it does not affect the environment, shrinkage the cost of fossil fuels. This proposal  basically consists of two sections, software programming which is interlaced with hardware components.

Project Implementation Method

Hardware

Benefits of the Project

.These projects can be used to power the traffic lights and streetlights
.These can be used in home to power the appliances using solar power.
.These can be used in industries as more energy can be saved by rotating the panel.
.This system we can use for industry, school, railway, bus etc. And where the electricity is not available we can use this application.

Technical Details of Final Deliverable

.This project gives 25% more effeciency then ordinary fixed panel

.Photovoltaic (PV) solar cell directly converts sunlight to electricity. A solar system with 10% efficiency covering 0.16% of earth would provide 20TW (Terawatt) energy,about twice the world consumption rate of fossils
energy.

.In South Asia, especially Pakistan is facing an acute shortage of electricity since 2000. In 2014, the short fall reaches 4500-5500 MW . To meet Pakistan’s soaring demand in energy, there is a need to devise efficient energy system which is capable to fulfill energy needs at present and is sufficient in future too. The world’s scientific advanced
countries are using renewable energy systems to meet their needs . These energy resources are environmental friendly and everlasting.

Pakistan is located in a region of the world where solar irradiance is approximately 2000 KWh/m2. In recent decades, grid-connected PV power plants have been implemented worldwide to fulfill the power requirements. Usually, these power plants are mounted fixed. However, with advancement in technology solar trackers have increased the yield

Final Deliverable of the Project

Hardware System

Core Industry

Energy

Other Industries

Manufacturing

Core Technology

Internet of Things (IoT)

Other Technologies

Others

Sustainable Development Goals

Affordable and Clean Energy, Industry, Innovation and Infrastructure

Required Resources

Elapsed time in (days or weeks or month or quarter) since start of the project Milestone Deliverable
Month 1Literature reviewA thoroughly literature review were been conducted to get know about the latest work done on solar tracking
Month 2Literature reviewA thoroughly literature review were been conducted to get know about the latest work done on solar tracking
Month 3Submission of proposal and application of project to departmentBy submitting the proposal and application to department /supervisor
Month 4Working on simulation of the projectWorking will be simulation of this project
Month 5Working on simulation of the projectWorking will be simulation of this project
Month 6Data collectionthrough the simulation design collect the data to procced hardware of the project
Month 7Working toward the hardware implementationworking on project by using the simulation result and with the help of literature review to step towards final project hardware
Month 8Working toward the hardware implementationworking on project by using the simulation result and with the help of literature review to step towards final project hardware
Month 9Working toward the hardware implementationworking on project by using the simulation result and with the help of literature review to step towards final project hardware
Month 10Working toward the hardware implementationworking on project by using the simulation result and with the help of literature review to step towards final project hardware
Month 11Submission of projectSubmit will the final hardware
Month 12Presentation of projectpresentation about the project and results
If you need this project, please contact me on contact@adikhanofficial.com
Smart vision based on optical character recognition and eye gaze track...

Eye tracking refers to the process of measuring where we look, also known as our point of...

1675638330.png
Adil Khan
9 months ago
Mobile Base complaint management system for Hinopak

In this project we developed a complaints management system for Hinopak where we raised co...

1675638330.png
Adil Khan
9 months ago
Food spoilage detector

Our product includes a mobile app with the hardware device. We need specific food samples...

1675638330.png
Adil Khan
9 months ago
GSM Based Industry Protection System

Project Summary: Security and automation is a prime concern in our day-to-day life. This...

1675638330.png
Adil Khan
9 months ago
Connected Greenhouse using IoT

The name connected greenhouse suggests itself that all the measurements and information is...

1675638330.png
Adil Khan
9 months ago