Multitasking covid safety system

The machine we are proposing here will be used for the offices, shopping malls & restaurants for covid safety, this machine will check human body temperature through the temperature sensor and sanitize hands by using fog sanitation system . Any person will not be provided entry without temperatu

Project Title

Multitasking covid safety system

Project Area of Specialization

Electrical/Electronic Engineering

Project Summary

The machine we are proposing here will be used for the offices, shopping malls & restaurants for covid safety, this machine will check human body temperature through the temperature sensor and sanitize hands by using fog sanitation system . Any person will not be provided entry without temperature and mask scan. Only person having both conditions is instantly allowed inside. As the manual supervison is not so effective, this system will make sure that no one is allowed through the entrance without mask, temperature scan and hand sanitation. The system uses temperature sensor and camera connected with a raspberry pi system to control the entire operation.

Project Objectives

The main objective of this project will be to replace intellectual persons and devices to perform multiple tasks at the same time. This machine is helpful under the circumstances of preventing the spread of covid, besides it is also helpful in keeping the environment hygienic and healthy. To design and build the system using raspberry pi and sensors.

Project Implementation Method

To solve our problems we here propose a fully automated temperature scanner and entry provider system. It is a multi purpose system that has a wide range of applications. The system makes use of a contactless temperature sensor, hand sanitization and a mask monitor. The scanner is connected directly with a human barrier to bar entry if high temperature or no mask is detected. Any person will not be provided entry without temperature and mask sense. Only person having both conditions is instantly allowed inside. • User will insert hands for sanitization through fog. • Temperature sensor will sense human body temperature • Mask scanning will be done by the camera • Then the door will be unlocked, Any person will not be provided entry without temperature and mask scan. Only person having both conditions is instantly allowed inside

Benefits of the Project

• Helpful In Prevention Of Spread Of Covid19.
• Lesser Human Interaction.
• Clean And Hygienic Enviroment.
• Water saving.
• Secure Entrance.
• Time saving.

Technical Details of Final Deliverable

We Are Proposing A System Which is mainly to overcome the spread of covid-19 and to keep the enviroment hygenic and healthy,

Firstly we are using raspberry pi 4 model b to operate our sytem. camera, temperature sensor, ultrasonic humidifiers, servo motor will be connected to raspberry pi.

Humdifers will be used for hand sanitation then temperature sensor will sense human body temprature,then the camera will scan for the mask. 

if all the conditions are fullfilled then the barrier will be lifted with the help of servo motor and the green light will be turned on, if the conditions are not matched the buzzer siren will be turned on along with the red light the barrier will not be lifted and the person will not be allowed inside.

Final Deliverable of the Project

HW/SW integrated system

Core Industry

Health

Other Industries

Core Technology

Internet of Things (IoT)

Other Technologies

Sustainable Development Goals

Good Health and Well-Being for People, Clean Water and Sanitation

Required Resources

If you need this project, please contact me on contact@adikhanofficial.com