Adil Khan 1 year ago
AdiKhanOfficial #FYP Ideas

Multistress Aging Chamber for High Voltage Insulators

At the end of this project we want to provide a chamber that can help test the desired insulators in a controlled environment. We hope to test the effects of humidity, heat and UV radiations of any desired area in the world through this chamber. We want to attain the required environment for te

Project Title

Multistress Aging Chamber for High Voltage Insulators

Project Area of Specialization

Electrical/Electronic Engineering

Project Summary

At the end of this project we want to provide a chamber that can help test the desired insulators in a controlled environment. We hope to test the effects of humidity, heat and UV radiations of any desired area in the world through this chamber. We want to attain the required environment for testing without going to that place. 

Project Objectives

The aim is to provide a Multistress aging chamber for insulators under high voltage stresses. We aim to combine the previously available chambers for efficiency to provide aging test results under AC as well as DC voltage and to provide lab testing instead of real life testing for researchers. Testing the insulators in the designated area requires a lot of resources plus we need to go to those areas to perform long term climatic tests. Our project will reduce cost and provide all sorts of environments that can be tested inside that chamber. Let’s suppose we install a newly introduced polymer insulator in the area we want it to be in we would have to install it in the open without any lab test since we don’t have anything to test climatic changes on the insulators and if it fails which is highly likely we would be wasting a lot of valuable material an time so this chamber will help us with the reduction in waste of valuable resources. Since it is a new concept one of our major objective is to provide a platform for further research on this in our career plus it will also provide a platform for those students who in the future want to develop this project and upgrade what we try to do.

Project Implementation Method

•AC and DC stress options

•Humidifier

•Heating Element

•UV Light

•Leakage current measurement

Benefits of the Project

The aim is to provide a Multistress aging chamber for insulators under high voltage stresses. We aim to combine the previously available chambers for efficiency to provide aging test results under AC as well as DC voltage and to provide lab testing instead of real life testing for researchers. Testing the insulators in the designated area requires a lot of resources plus we need to go to those areas to perform long term climatic tests. Our project will reduce cost and provide all sorts of environments that can be tested inside that chamber. Let’s suppose we install a newly introduced polymer insulator in the area we want it to be in we would have to install it in the open without any lab test since we don’t have anything to test climatic changes on the insulators and if it fails which is highly likely we would be wasting a lot of valuable material an time so this chamber will help us with the reduction in waste of valuable resources. Since it is a new concept one of our major objective is to provide a platform for further research on this in our career plus it will also provide a platform for those students who in the future want to develop this project and upgrade what we try to do.

Technical Details of Final Deliverable

The aim is to provide a Multistress aging chamber for insulators under high voltage stresses. We aim to combine the previously available chambers for efficiency to provide aging test results under AC as well as DC voltage and to provide lab testing instead of real life testing for researchers. Testing the insulators in the designated area requires a lot of resources plus we need to go to those areas to perform long term climatic tests. Our project will reduce cost and provide all sorts of environments that can be tested inside that chamber. Let’s suppose we install a newly introduced polymer insulator in the area we want it to be in we would have to install it in the open without any lab test since we don’t have anything to test climatic changes on the insulators and if it fails which is highly likely we would be wasting a lot of valuable material an time so this chamber will help us with the reduction in waste of valuable resources. Since it is a new concept one of our major objective is to provide a platform for further research on this in our career plus it will also provide a platform for those students who in the future want to develop this project and upgrade what we try to do.

Final Deliverable of the Project

Hardware System

Core Industry

Others

Other Industries

Core Technology

Others

Other Technologies

Sustainable Development Goals

Industry, Innovation and Infrastructure, Partnerships to achieve the Goal

Required Resources

Item Name Type No. of Units Per Unit Cost (in Rs) Total (in Rs)
transformer Equipment11500015000
chamber Equipment12500025000
heater Equipment110001000
humidifier Equipment150005000
UV lamps Equipment415006000
base bed Equipment320006000
Arduino mega Equipment130003000
relays Equipment91501350
PCB Equipment110001000
glass panel Miscellaneous 233256650
rectifier Equipment136503650
sensors Equipment310003000
basic components Miscellaneous 133503350
Total in (Rs) 80000
If you need this project, please contact me on contact@adikhanofficial.com
0
291
Cloud Based Monitoring Smart Room With IOT Devices

Recently advancement of technology and 5G communication, the internet of things (IoT) has...

1675638330.png
Adil Khan
1 year ago
Food Analysis controller using Infrared Sensor

High incidence of aflatoxins contamination has been reported in milk and milk products in...

1675638330.png
Adil Khan
1 year ago
An Implementation of Hybrid Embedded System using CNC plotter and Imag...

As we see around us technology is increasing rapidly and significantly, the use of the Com...

1675638330.png
Adil Khan
1 year ago
Vehicle Breakdown Assistantance App

The Proposed System (Vehicle Breakdown Assistance). This Application is designed to enhanc...

1675638330.png
Adil Khan
1 year ago
Design and Fabrication of Contactless Six DOF Robotic Arm

To develop a method for contact less processing of small delicate objects in industry.&nbs...

1675638330.png
Adil Khan
1 year ago