Kinematic Modeling and Prototype implementation of jellyfish mechanism based robot
This project focuses on the mathematical modeling and conceptual design of oceanic bio inspired jellyfish. The project focuses on the application of kinematics to model the peristaltic locomotion of jellyfish in modern robotics. The body will be modeled on software preferably CATIA and will be
2025-06-28 16:33:56 - Adil Khan
Kinematic Modeling and Prototype implementation of jellyfish mechanism based robot
Project Area of Specialization RoboticsProject SummaryThis project focuses on the mathematical modeling and conceptual design of oceanic bio inspired jellyfish. The project focuses on the application of kinematics to model the peristaltic locomotion of jellyfish in modern robotics. The body will be modeled on software preferably CATIA and will be fabricated by 3D printing as a bonus objective. This robot will allow to venture the oceans like of which has never been done before. Since peristaltic motion uses water to generate thrust so power can be saved. We shall install some motors in the structure of the jellyfish and create a low-pressure region using the motors inside the jellyfish. That will make the jellyfish move upwards in the water as the pressure of the water outside the jellyfish will be higher than inside and it will push it upwards. This project has very wide range of applications. For once we can use this robot to study the nature in the ocean and better understand the habitat of the fishes and ocean creatures.The Simulation will be terrain based
Project Objectives- To study the Application of kinematics in Bio inspired robot
- Learning Robot Modeling on software
- To study Bio mimicking
Literature review, mimicking jellyfish peristaltic locomotion, software and mathematical modeling and using electronics to create this motion.
Benefits of the ProjectFor oceanic surveillance
Technical Details of Final Deliverable Final Deliverable of the Project Hardware SystemCore Industry OthersOther Industries Security Core Technology RoboticsOther Technologies 3D/4D PrintingSustainable Development Goals Life Below WaterRequired Resources| Item Name | Type | No. of Units | Per Unit Cost (in Rs) | Total (in Rs) |
|---|---|---|---|---|
| Total in (Rs) | 49790 | |||
| Gobilda 2000 Series | Equipment | 3 | 4630 | 13890 |
| Arduino Uno | Equipment | 1 | 700 | 700 |
| 3D Printing | Equipment | 1 | 30000 | 30000 |
| Opencm9.04 | Equipment | 1 | 3200 | 3200 |
| IMU | Equipment | 1 | 2000 | 2000 |