The existing street light system is consuming a lot of energy because whole night the lights are glowing with full intensity even in the absence of vehicles or pedestrains.This is totally the wastage of energy that is why we are designing a system which can reduce the energy by automatical
IOT Based Smart street Light System
The existing street light system is consuming a lot of energy because whole night the lights are glowing with full intensity even in the absence of vehicles or pedestrains.This is totally the wastage of energy that is why we are designing a system which can reduce the energy by automatically switching ON and OFF the street lights.
optimize power consumption,secure RF communication,fault detection,automatic switching of the street lights,energy saving,reduction of manpower
the aim of project is to design an efficient energy system for street lights.As for demo prupose we implement it on two street lights when a car comes near the light,the sensor will sense it,the light turns ON and its brightness is low.When the car reaches below pole, maximum light is ON and when the car goes away from the pole then light intensity again falls.As ultrasonic sensor is used to check the distance between the car and the pole in this way we can save energy and our system is smart.It only runs at night as LDR is here to sense day and night time.If any fault appears in pole the data is sent to the cloud where concerned departments can see th fault and locate the place for correction of fault.
huge reduction of energy and maintenace cost,increase public safety from improved lighting,safer traffic due to increased visibility of hazards ,measurable environmental impact due to reduced energy consumption.
solar based backup system,pole to pole RF communication,system fault detection view on PC or mobile
| Item Name | Type | No. of Units | Per Unit Cost (in Rs) | Total (in Rs) |
|---|---|---|---|---|
| arduino uno | Equipment | 2 | 750 | 1500 |
| PIR | Equipment | 2 | 300 | 600 |
| ultrasonic sensor | Equipment | 2 | 250 | 500 |
| node MCU | Equipment | 1 | 850 | 850 |
| RF module | Equipment | 1 | 1000 | 1000 |
| bulb | Equipment | 2 | 150 | 300 |
| holders | Equipment | 2 | 125 | 250 |
| solar | Equipment | 1 | 2000 | 2000 |
| battery | Equipment | 1 | 1600 | 1600 |
| optocoupler | Equipment | 2 | 135 | 270 |
| ldr circuit | Equipment | 2 | 150 | 300 |
| AC strip | Equipment | 1 | 150 | 150 |
| veroboard | Equipment | 2 | 150 | 300 |
| mosfet | Equipment | 2 | 100 | 200 |
| buck converter | Equipment | 1 | 250 | 250 |
| relay board | Equipment | 2 | 250 | 500 |
| LCD | Equipment | 1 | 280 | 280 |
| IC | Equipment | 1 | 200 | 200 |
| jumper wires | Equipment | 1 | 800 | 800 |
| AC wire | Equipment | 1 | 200 | 200 |
| prototype board | Equipment | 1 | 1500 | 1500 |
| Total in (Rs) | 13550 |
According to NFPA report more than 300 to 400 firefighters death occur ever...
The smart fitness website is an after amrket product that is designed to automatically tra...
Autonomous underwater vehicles (AUVs) are considered autonomous because they have no physi...
Neo-Nest is an IOT based Infant Incubator which provides optimum environmental conditions...
Recently Data science is advancing at a fast pace and its application makes things easier...