IoT based Smart Energy Meter Using Raspberry Pi Including Fault Detection Alert
Web of things (IOT) is a system including electronic gadgets and sensors associated with trade data over the web in our investigation the current is separated from the electronic gadgets and sent to the ADC , where the changed over qualities are sent to the Raspberry Pi where the power esteem is fig
2025-06-28 16:33:40 - Adil Khan
IoT based Smart Energy Meter Using Raspberry Pi Including Fault Detection Alert
Project Area of Specialization Electrical/Electronic EngineeringProject SummaryWeb of things (IOT) is a system including electronic gadgets and sensors associated with trade data over the web in our investigation the current is separated from the electronic gadgets and sent to the ADC , where the changed over qualities are sent to the Raspberry Pi where the power esteem is figured a then sent to the database crosswise over web . Prior to the creation of the savvy meter customary meters were utilized. However, they had issues, for example, more inclined to blunders and not having the capacity to identify hardening. IOT is nearly financially savvy than SMS which influences checking vitality to meter at bring down cost conceivable. Month end utilization reports are produced which is observed by means of online interface. Enrolled clients can likewise make their installment on the web. The client at first needs to go to the site and enlisted, this is the place the client points of interest gets recorded in the information base, with an auto created number which turns into the essential key. He later need just to sign into his record for installment points of interest. The installment notice can be send either to his messages or as a SMS to the client. Through such a framework the clients can know about their power utilization and give some assistance towards vitality meter. We will investigate the working of vitality meter and its circuit graph.
Project ObjectivesThe objective of this project is to use the concept of wireless meter reading to get the monthly usage reading of our household and society.
Technologies developed on wireless meter reading are now really affordable and converged with familiar and popular technologies through this the theft in the electricity can be minimized at a good rate and by this we can improve our economy. By this we can get the exact bill of our house and society. As our population increases day by day.
Project Implementation MethodWhen the various appliances of the household consume energy the energy meter reads the reading continuously and this consumed load can be seen on meter.In our project we are trying to develop, a system in which Rraspberry pi act as main controller, which continuously monitor energy meter.As per the blinking of LED on energy meter the Raspberry pi will measure the unit consumption.
The measured reading with the calculation of the cost will be continuously displayed on web page that we have designed.Threshold value can be set on webpage with the help of Wi-Fi, as per the consumer’s requirement. When the consumers reading will be near about to the set threshold value it will send a notification value to the consumer.
Benefits of the Project- Low-noise analog signal path
- Device bandwidth is set via the new FILTER pin
- 5 ?s output rise time in response to step input current
- 80 kHz bandwidth
- Total output error 1.5% at TA = 25°C
- Small footprint, low-profile SOIC8 package
- ? 1.2 m? internal conductor resistance
- ? 2.1 kVRMS minimum isolation voltage from pins 1-4 to pins 5-8
- 5.0 V, single supply operation
- 66 to 185 mV/A output sensitivity
- Output voltage proportional to AC or DC currents
- Factory-trimmed for accuracy
- Extremely stable output offset voltage
- Nearly zero magnetic hysteresis
- Ratiometric output from supply voltage
An attempt has been made to make a practical model of ‘IoT Based Smart Energy Meter Including Fault Detection Alert’ feature. The propagated model is used to calculate the energy consumption of the household, and even make the energy unit reading to be handy. Hence it reduces the wastage of energy and bring awareness among all. Even it will deduct the manual intervention.
Final Deliverable of the Project Hardware SystemCore Industry Energy Other Industries IT Core Technology Internet of Things (IoT)Other Technologies Internet of Things (IoT)Sustainable Development Goals Industry, Innovation and InfrastructureRequired Resources| Item Name | Type | No. of Units | Per Unit Cost (in Rs) | Total (in Rs) |
|---|---|---|---|---|
| Total in (Rs) | 37400 | |||
| raspberry pi 3 | Equipment | 1 | 13000 | 13000 |
| Electric Load | Equipment | 5 | 800 | 4000 |
| Current Detection Sensor Module 0-20A AC Short-Circuit Protection | Equipment | 1 | 2600 | 2600 |
| Current sensor | Equipment | 2 | 1000 | 2000 |
| LCD | Equipment | 1 | 800 | 800 |
| Energy Meter | Equipment | 1 | 3000 | 3000 |
| Power Supply | Equipment | 1 | 2000 | 2000 |
| Casing | Miscellaneous | 1 | 5000 | 5000 |
| other | Miscellaneous | 1 | 5000 | 5000 |