IOT based Controlling and monitoring fire and smoke system in BRT

Project Title

IOT based Controlling and monitoring fire and smoke system in BRT

Project Area of Specialization Electrical/Electronic EngineeringProject Summary

Internet of Things (IoT) is basically the network of ‘things’ by which physical things can exchange data with the help of sensors, electronics, software, and connectivity. These systems do not require any human interaction. In this Arduino fire alarm system using temperature and smoke sensor using the IOT project, we can send information respective authorities of BRT. Some fire accident and smoke cases are report in BRT Peshawar bus. For the safety of public we came up with a new idea that a system will be design which will inform automatically detect fire and smoke and a notification will be sent to respective authorities. We used it to avoid the financial loss and save the people lives. They detects the fire and smoke at very early stage by identifying smoke or heat raise an alarm and a notification will be sent to respective authorities. Which tells people about the fire and smoke and give to people enough time to take preventive measures and save people lives.

Project Objectives

• Some fire accident and smoke cases are report in BRT Peshawar bus.
• For the safety of public we came up with a new idea that a system will be design which will inform automatically detect fire and smoke and a notification will be sent to respective authorities and alarm to bus driver.
• We used it to avoid the financial loss and save the people lives.
• They detects the fire and smoke at very early stage by identifying smoke or heat raise an alarm and a notification will be sent to respective authorities and alarm to bus driver.
• Which tells people about the fire and smoke and give to people enough time to take preventive measures and save people lives.

Project Implementation Method

• Programming language: Arduino Programming (C++)

• Arduino IDE :  Arduino Integrated Development Environment You will be needing Arduino IDE software to write and upload the programming logic onto the Arduino Uno board

• Protius Professional

• Hardware requirement

1. NodeMCU ESP8266(Wi-Fi Module)
2. USB Cable
3. Flame Sensor
4. Breadboard
5. Arduino Board(Arduino Uno)
6. LCD Display
7. LED
8. Potentiometer
9. Connecting Wires
10. Smoke Sensor
11. Buzzer
12. Resistors
13. Neo6mV2 GPS module
14. Capacitors
15. Variable Resistor
16. Jumper wires
17. Connecting wires
18. PCB sheet
19. Neo6MV2 GPS module to get live location
20. Node MCU for it has built in Wi-Fi and controller GPIO pins.

Benefits of the Project

Some fire accident and smoke cases are report in BRT Peshawar bus.

For the safety of public we came up with a new idea that a system will be design which will inform automatically detect fire and smoke and a notification will be sent to respective authorities and alarm to bus driver.

We used it to avoid the financial loss and save the people lives.

They detects the fire and smoke at very early stage by identifying smoke or heat raise an alarm and a notification will be sent to respective authorities and alarm to bus driver.

Which tells people about the fire and smoke and give to people enough time to take preventive measures and save people lives.

Technical Details of Final Deliverable

We are in the final stages of development and after completing we will test and validate our project and we hope that our project will be ready before our open hourse.

Final Deliverable of the Project Hardware SystemCore Industry ITOther Industries Others Core Technology Internet of Things (IoT)Other Technologies OthersSustainable Development Goals Industry, Innovation and InfrastructureRequired Resources

Item Name	Type	No. of Units	Per Unit Cost (in Rs)	Total (in Rs)
			Total in (Rs)	55720
NodeMCU ESP8266(Wi-Fi Module)	Equipment	1	1200	1200
USB Cable	Equipment	1	200	200
Flame Sensor	Equipment	1	560	560
Breadboard	Equipment	2	200	400
Arduino Board(Arduino Uno)	Equipment	2	1500	3000
LCD Display	Equipment	3	400	1200
LED	Equipment	20	8	160
Potentiometer	Equipment	2	70	140
Connecting Wires	Equipment	50	10	500
Smoke Sensor	Equipment	1	180	180
Buzzer	Equipment	2	70	140
Resistors	Equipment	10	5	50
Neo6mV2 GPS module	Equipment	2	1000	2000
Capacitors	Equipment	20	10	200
Variable Resistor	Equipment	10	15	150
Jumper wires	Equipment	50	12	600
Connecting wires	Equipment	50	12	600
PCB sheet	Equipment	10	50	500
Neo6MV2 GPS module to get live location	Equipment	2	1000	2000
Node MCU for it has built in Wi-Fi and controller GPIO pins.	Equipment	2	970	1940
thesis writing	Equipment	1	20000	20000
Programming using software	Equipment	1	10000	10000
printing and photostate	Miscellaneous	100	100	10000