Feasibility Study of Wind and CSP Hybrid System
We have to design a turbine that work on Wind and CSP by steam.When wind is not present then use CSP and produce electricity.
Project Title
Feasibility Study of Wind and CSP Hybrid System
Project Area of Specialization
Project Summary
We have to design a turbine that work on Wind and CSP by steam.When wind is not present then use CSP and produce electricity.
Project Objectives
To evaluate the dispatchability and firmness for a hybrid CSP Wind system plant.
To compare the PV-Wind & CSP-Wind.
To assess the advantages and technical constraints.
Project Implementation Method
First of all, the wind (jet Stream) strike the blade of wind turbine and the kinetic energy (speed) of wind is converted into the mechanical energy which is used to drive turbine and turbine is coupled to the electric generator which generates the electricity.
Blades lift and rotates when wind is blown over them causing the rotor to spin. Blades and hub together form the rotor. Turns the low speed shaft at about 30 to 60 rpm. Gear box connects the low speed shaft to the high-speed shaft and increases the rotational speeds from about 30 60 rpm to about 1000 to 1800 rpm this is the rotational speed required by most generators to produce electricity. The gear box is a costly and heavy part of the wind turbines. The direct drive generators that operates at lower rotational speeds and don’t need gear boxes. High speed shaft drives the generators.
Benefits of the Project
Our project is very benefits to our country because IPP Company use thermal power plants which use much fuel which is much costly but our project is less costly. Second we use concentrated solar panel (CSP) as compared to PV which is much benefits.
Technical Details of Final Deliverable
Our first task is to make wind model. Then we make CSP model and then combine both of them. At the end we check feasibility of both which is best results and efficiency.
Final Deliverable of the Project
Core Industry
Other Industries
Core Technology
Other Technologies
Sustainable Development Goals
Required Resources
| Item Name | Type | No. of Units | Per Unit Cost (in Rs) | Total (in Rs) |
|---|---|---|---|---|
| Motor | Equipment | 2 | 7000 | 14000 |
| Mechanical Design | Equipment | 1 | 7000 | 7000 |
| Inverter | Equipment | 1 | 10000 | 10000 |
| other cost | Miscellaneous | 1 | 5000 | 5000 |
| Total in (Rs) | 36000 |
If you need this project, please contact me on contact@adikhanofficial.com
Miniaturized Surface Mount Hearing Aid
In this project we will be designing a miniaturized pocket device for hearing impaired pat...
Utilizing Socially assistive Robots SARs to motivate post stroke lower...
Limbs impairment whether it is lower limb or upper limb is the common outcome of stroke. R...
MINI HYDRO ELECTRIC GENERATOR
we know that 70% of the earth is covered with water and it is enough to satisfy much, or e...
FPGA Based Lane Detection And Tracking System For Autonomous Vehicles
There have been great advancements in the field of computer vision due to the utilization...
Pi Class
During the pandemic, the sector that got most affected is the education sector. There was...