fabrication of microcontroller based ATS and AMF industrial generator controller
In the event of significant loss of mains power or total blackout, emergency standby generators are used. Important data, potential damage to electrical equipment and huge amount of disruption may result if generators are operated manually. That is why it is essential to design a system whic
Project Title
fabrication of microcontroller based ATS and AMF industrial generator controller
Project Area of Specialization
Project Summary
In the event of significant loss of mains power or total blackout, emergency standby generators are used.
Important data, potential damage to electrical equipment and huge amount of disruption may result if generators are operated manually. That is why it is essential to design a system which monitors the incoming AC mains supply activate the standby generator when mains fails and make an automatic electrical transfer of load from mains to generator. When mains return, shuts down the generator after suitable cooling run. For this purpose we will fabricate a system which is microcontroller based to monitor and control the switching and also control the fuel consumption of generator.
Project Objectives
- To study the existing ATS and AMF Systems.
- To design Switching system of two sources through Electrical Interlocking.
- To design ATS system and AMF system.
- To develop and analyze hardware model of the proposed system.
- Compare proposed system with existing system.
Project Implementation Method
- Complete study of Electrical Interlocking and design an Electrical Interlocking System.
- Detailed Study of ATS System
- Design hardware of Electrical Interlocking
- Experimental work with developed hardware model
- Detailed study of AMF System
- Design hardware model for AMF System
Benefits of the Project
- Uninterrupted electrical supply
- Provides efficient switching to generator power
- Ensures safety
- Faster connection
- Fuel consumption control
- Reliability of electrical Power
Technical Details of Final Deliverable
- The proposed system is Microcontroller based ATS and AMF system.
- ATS system will do switching and AMF will control the fuel consumption through the Fuel Valve.
- Microcontroller will sense which supply is there and will do switching according to that supply and if generator supply is there then it will also control the fuel consumption according to the load.
- The system will do switching according to preferences set by microcontroller.
Final Deliverable of the Project
Type of Industry
Technologies
Sustainable Development Goals
Required Resources
| Item Name | Type | No. of Units | Per Unit Cost (in Rs) | Total (in Rs) |
|---|---|---|---|---|
| Generator | Equipment | 1 | 50000 | 50000 |
| Magnetic Contactor | Equipment | 2 | 2500 | 5000 |
| Microcontroller | Equipment | 1 | 3000 | 3000 |
| Fuel Valve | Equipment | 1 | 1000 | 1000 |
| Relay | Equipment | 1 | 1500 | 1500 |
| Circuit Breaker | Equipment | 2 | 500 | 1000 |
| Assembly Board | Equipment | 1 | 4000 | 4000 |
| Accessories | Miscellaneous | 5 | 1000 | 5000 |
| Total in (Rs) | 70500 |
If you need this project, please contact me on contact@adikhanofficial.com
Automated Greenhouse Monitoring System
As to summarize the project we can say that a greenhouse is a building with glas...
Grand Training Auto
This project is a car driving training simulation that consists of map with familiar route...
Design and Development of Portable Wind Energy System
We propose design and development of a portable wind turbine that generates electrical pow...
Intelligent allergy recognition system
It's an Intelligent Allergy Recognition System. In past we didn?t have a system like this...
Energy Efficient Appliance Automation
Saving power has become ever so more important than before as we use more and more of the...