Fabrication and analysis of catalytic converter using smoke analyzer

The issue of reduction of harmful pollutants emitted from an internal combustion engine has gained large prominence as a part of climate change and global warming. Automobile and power generation systems are identified to be one of the largest contributors to atmospheric pollution. Some of t

Project Title

Fabrication and analysis of catalytic converter using smoke analyzer

Project Area of Specialization

Mechanical Engineering

Project Summary

The issue of reduction of harmful pollutants emitted from an internal combustion engine has gained large
prominence as a part of climate change and global warming. Automobile and power generation systems
are identified to be one of the largest contributors to atmospheric pollution. Some of the major pollutants
emitted from an engine are Oxides of Nitrogen (NOx), Carbon monoxide (CO), Unburnt Hydrocarbon
(UBHC) and soot particles. A catalytic converter with emission reduction catalysts
to be used for compressed ignition engine. The catalytic converter is developed based on the catalyst
materials consisting of metal oxides such as aluminum oxide and titanium dioxide coated with wire
mesh filter. Both the catalyst materials – aluminum oxide and titanium dioxide are inexpensive in comparison
with conventional catalysts such as palladium or platinum.

Project Objectives

• • Analysis of gases exhausted by modified catalytic converter using smoke analyzer.
  • Comparing the results with ordinary catalytic converters.

Project Implementation Method

•Stage I:  Selection of Chemical Compounds.

•Stage II: Selection  of Chemical Compounds.

•Stage III: Selection of Catalytic converter.

•Stage IV: Fabrication of full System.

•Stage V: Testing and Analysis of Modified Catalytic  Converter

Benefits of the Project

To develop cost effective catalytic converter.

It can be install small vehicles because of its less cost.

High rate of conversion of pollutants makes it more efficient.

Technical Details of Final Deliverable

The major aspects of this project is to reduce the pollutants coming out of the exhaust of an engine that is a major contribution of pollution.

It can be install small vehicles because of its less cost.

Final Deliverable of the Project

Hardware System

Core Industry

Transportation

Other Industries

Others

Core Technology

Clean Tech

Other Technologies

Others

Sustainable Development Goals

Affordable and Clean Energy

Required Resources

If you need this project, please contact me on contact@adikhanofficial.com