The induction motor (IM) is an essential component of industrial machinery and is considered a main mechanical power source in the industry; therefore, any fault in induction motors directly leads to a significant downtime of the entire system and disrupts production. The early detection of faults i
Development of Real-Time Condition Monitoring and Fault Identification for Three Phase Induction Motor
The induction motor (IM) is an essential component of industrial machinery and is considered a main mechanical power source in the industry; therefore, any fault in induction motors directly leads to a significant downtime of the entire system and disrupts production. The early detection of faults in IM helps in predicting motor failures optimising motor maintenance, reducing maintenance costs, reducing downtime, and improving the overall reliability of the system. Different methods are used to identify the faults of IM; however, the proposed work will use MCSA and vibration signal analysis because of their popularity to develop a cost-effective and real-time condition monitoring and fault identification system. The proposed system will compare the frequency spectrum of healthy and unhealthy motor current and vibration signals and will use a machine-learning algorithm to evaluate the performance of IM.
The Project Objectives are explained as:
The methodology can be summarized as follows:
1. Initially, we will carry out a detailed literature review.
2. Then, we will develop an experimental setup for a three-phase induction motor.
3. Then, we will collect the data (current signal, vibration signal and temperature) for measuring the fault of the induction motor and apply the signal processing technique.
4. Then, we will build a GUI using MATLAB for fault identification of other induction motors based on machine learning algorithms.
5. Finally, we will test the motors and will generate the faults report.
The Benefits of the Project can be summarized as follows:
We make the Physical test Bench for Fault identification.


We add some work we did.

















| Item Name | Type | No. of Units | Per Unit Cost (in Rs) | Total (in Rs) |
|---|---|---|---|---|
| 1.5 hp Induction motor | Equipment | 2 | 7000 | 14000 |
| Stm 32 necleu-64 F103RB | Equipment | 1 | 4200 | 4200 |
| ADXL335 (vibration sensor) | Equipment | 1 | 550 | 550 |
| DHT22 (Temperature Sensor) | Equipment | 1 | 300 | 300 |
| ACS722 (Current sensor) | Equipment | 1 | 320 | 320 |
| Pully Wheel | Equipment | 1 | 1600 | 1600 |
| Pully Bore | Equipment | 1 | 250 | 250 |
| Light Meter | Equipment | 1 | 1600 | 1600 |
| Box 8x10 | Equipment | 1 | 700 | 700 |
| Breadboard | Equipment | 2 | 50 | 100 |
| Balance Load | Equipment | 2 | 700 | 1400 |
| Bearing 6204 | Equipment | 2 | 25 | 50 |
| Belt (8 feet) | Equipment | 1 | 480 | 480 |
| STM Data Cable | Equipment | 2 | 100 | 200 |
| PCB Complete | Equipment | 1 | 680 | 680 |
| Bolt & Nuts | Equipment | 1 | 560 | 560 |
| Wooden Piece | Equipment | 2 | 150 | 300 |
| Electric Wire | Equipment | 1 | 1000 | 1000 |
| Synopsis (Print+Bind) | Miscellaneous | 1 | 1500 | 1500 |
| Total in (Rs) | 29790 |
An estimated 1.1 billion people and around 14% of the world?s population don?t have the el...
Our project is on the prosthetic hand, in which we are working to make the prosthetic hand...
The main theme and research behind this project is to decrease the load on the utility gri...
Zero energy building is a building with zero net energy consumption meaning the total amou...
Pakistan is enriched with one of the natural resource "coal" that why we mostly depend on...