The purpose of this project is to understand mechanical behavior of composite solid propellants and develop a constitutive model. Constitutive models describe the material responses to different mechanical and/or thermal loading conditions, which provide the stress?strain relations, together wi
Development of constitutive model of composite solid propellant and study its mechanical properties
The purpose of this project is to understand mechanical behavior of composite solid propellants and develop a constitutive model. Constitutive models describe the material responses to different mechanical and/or thermal loading conditions, which provide the stress–strain relations, together with the conservation laws and kinematic relations. Therefore, it’s important to understand how constitutive models are developed and how useful conclusions are drawn from a constitutive model. Composite modeling software Ansys and Abaqus were used to model composite solid propellant. Python codes were also utilized to develop constitutive model. In this project a systematic numerical program was conducted to understand the stress?strain behavior of a composite solid propellant after different set of experiments such as tensile, fatigue and creep under different loads and boundary conditions. The effects of accelerated aging time and pre-strain during aging on the mechanical behavior of the propellant were analyzed and a constitutive model was developed.
Selection of Composite Solid Propellant
Defining grain size of component in Solid propellant
Defining material Software
Composite modeling
Performing Different Mechanical Test i.e
Comparing results with practical data available
Perfrom these steps using ABAQUS Software
Campare both the results
Developing Constitutive model
Direct Benefits:
Indirect Benefits:
Modelling of Composite solid propellant under different grain sizes.
Identify its Mechanical Properties by performing mechanical tests.
Development of a Constitutive Model
| Item Name | Type | No. of Units | Per Unit Cost (in Rs) | Total (in Rs) |
|---|---|---|---|---|
| Catia V5-6R2018 Software | Equipment | 1 | 10000 | 10000 |
| Abaqus 2022 Software | Equipment | 1 | 35000 | 35000 |
| Ansys 2022 R1 | Equipment | 1 | 25000 | 25000 |
| Total in (Rs) | 70000 |
To keep the log of head of departments visit to branches there was a need of an applicatio...
In this modern era of technology all sectors are marching toward rapid growth. With the in...
The main objective of this project is to propose a ?Solar and Wind Hybrid Energy Dispatch...
Water has been the most important factor in human life. Human not only use it to sustain i...
En-route Together is a new, self-contained product that is the sharing of car journeys so...