Designing of Dual Band GNSS Amplifier
Projects related to this topic are discussed in this survey which shows that how a dual band or a multi-band GNSS amplifier or antenna is designed using various softwares and some different parameters like different frequencies and different procedures like simulation, fabrication and testing etc.In
Project Title
Designing of Dual Band GNSS Amplifier
Project Area of Specialization
Project Summary
Projects related to this topic are discussed in this survey which shows that how a dual band or a multi-band GNSS amplifier or antenna is designed using various softwares and some different parameters like different frequencies and different procedures like simulation, fabrication and testing etc.In the bottom layer of a threelayer antenna device, a two-stage LNA with more than 27 dB gain is built. In addition, to create the circular polarization (CP) feature, a hybrid coupler is employed to mix signals from two approximately linked orthogonal feeds with a 90° phase difference. Three layers of high permittivity (r = 10) substrates are layered and combined to achieve a tiny size of 64 mm’64 mm’7.42 mm. The manufactured antenna has a reflection coefficient of less than -10 dB at the target frequency, an antenna gain of more than 26 dB, and a noise figure of less than 1.4 dB.
Project Objectives
To design a GNSS amplifier which will help to enhance the satellite signals in the areas where the signals are very weak. For example: GPS maps in mobile phone.
Project Implementation Method
It can be implemented in 3 layers:
1- Designing of the prototype in Advance Design System.
2- Fabrication of the prototype.
3- Testing of the validation of results.
Benefits of the Project
To design a GNSS amplifier which will help to enhance the satellite signals in the areas where the signals are very weak. For example: GPS maps in mobile phone.
Technical Details of Final Deliverable
• Schematic design of amplifiers on Advance Design System. • Co-simulation of amplifiers in ADS.
• PCBs (Printed Circuit Board) for the amplifiers fabricated on FR4 board using LPKF MK-60 machine in CAE ADS lab.
• Complete amplifier with patched SMT (Surface Mounted Technology) components using expertise available in KARF (Kamra Avionics and Radar Factory).
• Measuring Data of amplifiers using VNA (Vector Network Analyzer).
Final Deliverable of the Project
Core Industry
Other Industries
Core Technology
Other Technologies
Sustainable Development Goals
Required Resources
| Item Name | Type | No. of Units | Per Unit Cost (in Rs) | Total (in Rs) |
|---|---|---|---|---|
| new generation laptop | Equipment | 1 | 70000 | 70000 |
| Total in (Rs) | 70000 |
If you need this project, please contact me on contact@adikhanofficial.com
An Autonomous Shopping System Using Vision And Sensor Fusion Technique...
INTRODUCTION: The Project Title is "An Autonomous Shopping System Using Computer Vision...
Department Training automation system(DTAS)
Department Training automatoin system Departmental Training Automation System (DTAS)...
Design and fabrication of sandwich composite panels for emergency shel...
We are using sandwich panels to build high performance light-weight structures which are c...
Multiplayer Game Based on Augmented Reality
We have been inspired by A.R by looking at Pokemon Go game, we want to make a similar game...
Smart Virtual Training Mirror
The Smart Exercise Mirror is a revolutionary mirror for exercise. It's an interactive devi...