As we have seen that there are more and more petrol engine vehicles are introduced in market and due to this increase in petrol engines global warming, harmful gases and the other factors that harm our climate are increasing day by day. So, we have an aim that we should introduce cheap and efficient
Designing and Development of an Electric Car
As we have seen that there are more and more petrol engine vehicles are introduced in market and due to this increase in petrol engines global warming, harmful gases and the other factors that harm our climate are increasing day by day. So, we have an aim that we should introduce cheap and efficient electric vehicles (EV's) in pakistan so we can over come this problem and take an initiative step towards green enviorment. As most of the countries including India are working on EV's to introduce in market for public. If we will use EV's then there will be almost no harmfl gases will be escaped in the climate and our Ozone layer wil remain protected.
Our objective is to make Pakistan petrol engine free so there will be cheap means of transport availble for the public. First priorty is to make such vehicles that are enviorment friendly and by using EV's there will be not any emission of CO2 in the enviorment. We will make cheap vehicles for our public so they can easily afford them and can charge their battries at their home or also the charging stations provided by the Govt. (if it will get on commercial level).
We will use a Dc motor that will drive energy from the battries attched. We are using a motor drive circuit that we regulate the speed of the motor according to our need and applying pressure on the throttle. It will be cheap means of transport and needs low cost maintanance. We are using Variable Regulated Lead Acid (VRLA) battries instead of Li-Po battries and we are providing Cruise Control activation during the drive by using Arduino Uno.
As dicussed above about the benefits and all the advantages od this project it will be cheap means of transport and requires low maintanance.
Final deliverables of this project is that it will be a 2 seater vehilcle that will run at a speed of 30 km/h to 40 km/h that speed is enough to be used in cities. These vehicles will be very useful to be used in cities. These vehices does not have any by product that willharm our enviorment.
| Item Name | Type | No. of Units | Per Unit Cost (in Rs) | Total (in Rs) |
|---|---|---|---|---|
| Dc Motor 2KW | Equipment | 1 | 17500 | 17500 |
| Motor Drive | Equipment | 1 | 5500 | 5500 |
| Car Body | Equipment | 1 | 33000 | 33000 |
| Iron Sheet | Miscellaneous | 1 | 7500 | 7500 |
| Front Lights | Equipment | 2 | 1700 | 3400 |
| Tail Lights | Miscellaneous | 2 | 1000 | 2000 |
| Indicators | Miscellaneous | 2 | 250 | 500 |
| Seats | Equipment | 2 | 5000 | 10000 |
| Total in (Rs) | 79400 |
We know that brain control the functions of various natural organs and components of human...
The project pertains to development of an IoT aided system for Water Supply Systems that c...
Body area network, in wireless communication, is termed as a collection of small lightweig...
We proposed an intelligent cart which senses the product which is purchased by the custome...
The continuous energy crisis in Pakistan enlightened the need to increase the installed ca...