Design and Fabrication of Oil Pump Test bench for APC
The purpose of this project is to develop an oil pump performance test bench. The objective of test bench is to monitor the performance of oil pump under varying conditions. If we install the pump without testing and if the pump is not feasible, it is the wastage of time, labour and cost and it can
Project Title
Design and Fabrication of Oil Pump Test bench for APC
Project Area of Specialization
Project Summary
The purpose of this project is to develop an oil pump performance test bench. The objective of test bench is to monitor the performance of oil pump under varying conditions. If we install the pump without testing and if the pump is not feasible, it is the wastage of time, labour and cost and it can also harm the equipment or surroundings. Before using it in actual application, performing test in a factory is an important task because at that stage if test reveals that adjustment need to be made, it becomes feasible to remove the pump off and made the necessary corrections.
Project Objectives
The objective of oil pump endurance test bench is to monitor the performance of oil pump in varying conditions
•Pressure
•Flow
•Temperature
To verify the correctness of design of a pump.
To save time, money and man power.
Fabrication of a machine that will be easy to operate and economical for industrial applications.
Project Implementation Method
We will use pressure gauges, flow meter and temperature sensors for the measurement of pressure flow and temperature at outlet and inlet.
We will apply the fluid mechanics knowledge.
Logic programmable controller will be used to show the conditions.
A Motor will be used to provide RPM to pump.
Benefits of the Project
As the market and government regulations push automakers to improve emissions and fuel consumption, they are evaluating all opportunities in the engine system to reduce losses. The oil pump is one important component that consumes engine power as it protects engine components from frictional wear and overheating by delivering oil at the correct pressures.
The purpose of this project is to develop an oil pump performance test bench. The objective of test bench is to monitor the performance of oil pump under varying conditions. If we install the pump without testing and if the pump is not feasible, it is the wastage of time, labour and cost and it can also harm the equipment or surroundings. Before using it in actual application, performing test in a factory is an important task because at that stage if test reveals that adjustment need to be made, it becomes feasible to remove the pump off and made the necessary corrections.
Technical Details of Final Deliverable
We will use pressure gauges, flow meter and temperature sensors for the measurement of pressure flow and temperature at outlet and inlet.
We will apply the fluid mechanics knowledge.
Logic programmable controller will be used to show the conditions.
A Motor will be used to provide RPM to pump.
Final Deliverable of the Project
Core Industry
Other Industries
Core Technology
Other Technologies
Sustainable Development Goals
Required Resources
| Item Name | Type | No. of Units | Per Unit Cost (in Rs) | Total (in Rs) |
|---|---|---|---|---|
| Pressure Guage | Equipment | 2 | 2000 | 4000 |
| Heat exchanger | Equipment | 1 | 10000 | 10000 |
| Temperature sensor | Equipment | 2 | 1000 | 2000 |
| flow meter | Equipment | 1 | 1200 | 1200 |
| Steel sheets | Equipment | 8 | 1200 | 9600 |
| PLC | Equipment | 1 | 8000 | 8000 |
| Screen | Equipment | 1 | 500 | 500 |
| Electric motor | Equipment | 1 | 15000 | 15000 |
| Glass | Miscellaneous | 5 | 800 | 4000 |
| Clamps | Miscellaneous | 4 | 1500 | 6000 |
| Boards and wires | Equipment | 1 | 2000 | 2000 |
| Printing | Miscellaneous | 0 | 800 | 0 |
| Total in (Rs) | 62300 |
If you need this project, please contact me on contact@adikhanofficial.com
Speak Through Eye Movements Glasses
Almost 15% of the world population experience some form of disability and accord...
Power Generation through Tidal Energy
Tidal energy projects are the most reliable source if electricity generation due their ren...
Smart Engraving and Carving Machine
PROJECT SUMMARY A computer numerical control (CNC) machine is a computer-controlled cuttin...
clean and safe city
Pakistan generates about 48.5 million tons of solid waste a year, which has been increasin...
Design of Cloud-based Remote Telemetry System for Small Power Generati...
In this project, a cloud-based system will be designed that will be able to measure the ou...