Design and development of Android based three D printing using stepper motors
This project contains mechanical knowledge , software knowledge as well as electrical knowledge.It is the apllication of stepper motors in which the position & accuracy of heat bed (on which the object will be made) of 3D printer is controlled by using these motors. Microcontroll
Project Title
Design and development of Android based three D printing using stepper motors
Project Area of Specialization
Project Summary
This project contains mechanical knowledge , software knowledge as well as electrical knowledge.It is the apllication of stepper motors in which the position & accuracy of heat bed (on which the object will be made) of 3D printer is controlled by using these motors. Microcontroller Arduino Mega is usedd to control all the operation of 3D printer.At the end,we get the finished 3D object.
Project Objectives
To design an android based 3D printer having reasonable cost which will save time, labor efforts and ultimately improves the accuracy of prototype models and provide efficient industrial models.
Project Implementation Method
Fused deposition modelling,a lso called fused filament modelling is used in this project and the filament is PLA ( poly lactic acid).
Benefits of the Project
Any 3d object can be made easily which can be used in any field.
Technical Details of Final Deliverable
Major technical specifications include 5 stepper motors, 5 stepper motor drivers to run stepper motors,Arduini mega board, Ramp 1.5 kit for interfacing all other elements of the project. However, mechanical apparatus include nozzle,heat bed, extruder, pulley,rods & end stops.
Final Deliverable of the Project
Core Industry
Other Industries
Core Technology
Other Technologies
Sustainable Development Goals
Required Resources
| Item Name | Type | No. of Units | Per Unit Cost (in Rs) | Total (in Rs) |
|---|---|---|---|---|
| 2020 V-Slot profiles 4 meters | Equipment | 1 | 8000 | 8000 |
| 2040 V-Slot profiles 3 meters | Equipment | 1 | 7000 | 7000 |
| Rollers for V-Slot profiles | Equipment | 12 | 300 | 3600 |
| 8mm steel rods 2 meters | Miscellaneous | 2 | 500 | 1000 |
| Linear Bearing Blocks | Equipment | 5 | 400 | 2000 |
| Sliding nuts M5 for 20 series profiles | Miscellaneous | 30 | 40 | 1200 |
| Hammer head rotating nuts M5 | Miscellaneous | 15 | 25 | 375 |
| Arduino Mega Board | Equipment | 1 | 550 | 550 |
| Stepper motors | Equipment | 5 | 1500 | 7500 |
| Stepper motor drivers | Equipment | 5 | 200 | 1000 |
| PLA (red) | Equipment | 1 | 3000 | 3000 |
| Print bed & mounting bracket | Equipment | 1 | 8000 | 8000 |
| End Stop | Miscellaneous | 3 | 30 | 90 |
| Ramps 1.5 Kit | Equipment | 1 | 850 | 850 |
| Documentation | Miscellaneous | 1 | 5000 | 5000 |
| Total in (Rs) | 49165 |
If you need this project, please contact me on contact@adikhanofficial.com
Stuttering Assessment System
In this era of technological advancement and unprecedented change where the rate of innova...
Design and Development of a system for mimicking human arm motion by a...
The idea is about to design and develop a manipulator which can mimic exactly the motion o...
Secure Pick and Drop System for Kids
The proposed project will be of three modules, drivers, parents and admin panel for the sc...
IoT Based Energy management and Monitoring System
Our project aims to design and Implement an IoT-based control and monitoring system that c...
Leg Amputee Automated Prosthesis
This summary is about the project, named LEAP (Leg Amputee Automated Prosthesis)...