design and development of 200 watt wideband amplifier 1 3 ghz11541
Student is expected to design and develop 200 Watts Wideband Amplifier. This design and prototype will be used in various R&D projects. Figure of merits (FoM) for the project are: (a) Frequency Range: 1 GHz ? 3.0 GHz (b) Saturated Output Power: 200 Watts Min @ single tone (c) Max
Project Title
Project Area of Specialization
Project Summary
Student is expected to design and develop 200 Watts Wideband Amplifier. This design and prototype will be used in various R&D projects. Figure of merits (FoM) for the project are:
(a) Frequency Range: 1 GHz – 3.0 GHz
(b) Saturated Output Power: 200 Watts Min @ single tone
(c) Max Input Power : 7 dbm
(d) Input and Output VSWR : < 2.0 : 1
(e) RF Input Signal Format: CW (Continuous Wave).
(f) Small signal Gain : 50 dB min
(g) Input Connectors : SMA Female
Project Objectives
(a) Design of 200 Watts Wideband Amplifier.
(b) Prototype Development of Proposed Design.
(c) Key Performance Indicators Measurements of designed Prototype
Project Implementation Method
A detailed study of wideband power amplifiers and their design will be
carried out. The basic amplifier’s design has been started. ADS 2019
will be used for the design. Following that, a prototype of the proposed
design will be created. Testing will be done to compare simulation results
to fabricated results. The designed prototype will be used to study and
measure the key performance metrics. The documentation of the entire
project will be completed at the end.
Benefits of the Project
• The wideband power amplifiers provide consistent performance across
its operating frequency, minimizing the need for external equalizing
networks in wideband applications.
• Built-in protection against reverse bias and accidental open and short
loads provides added reliability.
• It has high fidelity because of the output being exact replica of an
input signal.
• It has improved high-frequency response because the active device
is ON full time, i.e. no time is required to turn on the device.
• Theatrical and concert sound reinforcement, as well as public address
systems
• Wideband power amplifiers can be used in circuits involving different
amplifier IC’s which can increase the gain and hence the power of
the amplified signal
Technical Details of Final Deliverable
The design specifications for the project are:
• Frequency Range: 1 GHz – 3.0 GHz
• Saturated Output Power: 200 Watts min @ single tone
• Max Input Power : 7 dBm
• Input and Output VSWR : less than (2.0 : 1)
• RF Input Signal Format: CW (Continuous Wave)
• Small signal Gain : 50 dB min
• Input Connectors : SMA Female
The Expected deliverables of the project are as follows
• Design of 200 Watts Wideband Power Amplifier.
• Prototype Development of Proposed Design.
• Key Performance Indicators Measurements of Designed Prototype.
Final Deliverable of the Project
Core Industry
Other Industries
Core Technology
Other Technologies
Sustainable Development Goals
Required Resources
| Item Name | Type | No. of Units | Per Unit Cost (in Rs) | Total (in Rs) |
|---|---|---|---|---|
| RF Power GaN HEMT | Equipment | 2 | 19000 | 38000 |
| RF Mosfet HEMT | Equipment | 1 | 32000 | 32000 |
| Fabrication | Miscellaneous | 1 | 10000 | 10000 |
| Total in (Rs) | 80000 |
If you need this project, please contact me on contact@adikhanofficial.com
SECURITY ALARM FOR BANK AND MUSEUM
The use of security cameras is no new to us. But these have had been carrying a significan...
Automated Exam Conducting System
Automated Systems are becoming very essential in this modern education system. With the he...
End to End Framework for Neurological Health Monitoring
The prevalence of neurological disorder has drastically increased over the years resulting...
KeepIn It Fresh
?This is a sensor-based application that we remain generating in which our goal is to dete...
Food Consumption Tracker with Health Advices
Health Consciousness corresponds to self-awareness about one?s health, and the willingness...