Automatic Grass cutter (IOT based)
Manual grass cutter robots are available in Pakistan, but they consume alot of time and they need physical assistance at any place. we are going to design an IOT based automatic grass cutter robot which has the ability of water sprinkle and it can be controlled globally using IOT. we would used ardu
Project Title
Automatic Grass cutter (IOT based)
Project Area of Specialization
Project Summary
Manual grass cutter robots are available in Pakistan, but they consume alot of time and they need physical assistance at any place. we are going to design an IOT based automatic grass cutter robot which has the ability of water sprinkle and it can be controlled globally using IOT. we would used arduino software and board for the designing and programming of robot. This robot take initial command and move automatically through mobile command wirelessly.
Project Objectives
The main objectives of project are
- move automatically and cut the grass in specific area.
- controlled globally using IOT
- Battery powered because some grass cutter are based engine and they require diesel.
- Energy efficient and low power consumption.
- cost effective
Project Implementation Method
The implementation of project comprises of following steps
- Literature review of previous work and indicate the short comings of previous work
- Equipment selection for the specific application
- Mathematical Model of project
- circuit designing and implementation
- Circuit simulation on proteus software
- circuit testing on proteus software using arduino programming
- Hardware designing of project
- Hardware testing of project
- Mechanical designing
- mechanical manufacturing
- hardware and software intergeration and testing
Benefits of the Project
The benifits of this project are as follows
- cost effective
- energy efficient
- easy to use
- there is no requirement of physical assistance
- globally control using IOT
Technical Details of Final Deliverable
The technical detail of final deliverables are as follows
- Literature review of previous work and indicate the short comings of previous work
- Equipment selection for the specific application
- Mathematical Model of project
- circuit designing and implementation
- Circuit simulation on proteus software
- circuit testing on proteus software using arduino programming
- Hardware designing of project
- Hardware testing of project
- Mechanical designing
- mechanical manufacturing
- hardware and software intergeration and testing
Final Deliverable of the Project
Core Industry
Other Industries
Core Technology
Other Technologies
Sustainable Development Goals
Required Resources
| Item Name | Type | No. of Units | Per Unit Cost (in Rs) | Total (in Rs) |
|---|---|---|---|---|
| arduino UNO | Equipment | 3 | 875 | 2625 |
| motors | Equipment | 3 | 4820 | 14460 |
| mechanical structure | Equipment | 1 | 22310 | 22310 |
| tyres | Equipment | 4 | 1950 | 7800 |
| motor driver | Equipment | 3 | 4420 | 13260 |
| resistor , capacitor, inductor etc | Miscellaneous | 1 | 5210 | 5210 |
| wires, gum , soldering wire , paste etc | Miscellaneous | 1 | 4560 | 4560 |
| Total in (Rs) | 70225 |
If you need this project, please contact me on contact@adikhanofficial.com
smart home appliances automation using IOT
Nowadays, people have smartphone with them all the time. so it make sense to use these to...
Depression and Stress Detection Using Speech Emotion Recognition
Keep in mind that depression is becoming an increasingly serious problem around the world....
Simulation of Bionic Glove for Rehabilitation of the Paralyzed Hand
Paralysis is a neurological disorder that causes immobility of a specific part or the whol...
Real Time Spying Robot
A Robot is a machine that is intended to perform a specific program dependent on writing c...
Attendance system using facial recognition
Our goal is to implement the whole facial recognition system in our university by collecti...