The project Automated irrigation system implies that automatic watering system to the fields which require water. As we know that even in this vast era of technology farmers still needs to water the field manually. This automatic irrigation system will make sure to supply the water when the fie
Automated Irrigation System Using PLC
The project Automated irrigation system implies that automatic watering system to the fields which require water. As we know that even in this vast era of technology farmers still needs to water the field manually. This automatic irrigation system will make sure to supply the water when the field need to be watered. The moisture shall be sensed through the moisture sensor which signals the PLC to open the valve for the fields.
The output of the sensors and the flow of water can be seen on HMI and smartphone by using CMT.
The objectives of this project are listed below
1 : To detect the moisture of the field.
2 : To operate the valve for the field
3 : Designing the three modes of operation that are sensor mode, timer mode and the combination of sensor and timer mode.
4 : To display the results of the project on HMI and smartphone by using CMT.
5 : PLC based control system which implies automatic watering.
1) Develop a ladder logic according to the requirement of the mode
2) Develop a HMI to show the result and make changes if required.
3) Develop a hardware to implement the logic and note the results.
It will reduce the manpower that is required for irrigating the field.
It will increase the efficiency of the agriculture industry.
The most important advantage of the project is to save the wastage water
1) Representating the whole process on HMI and CMT.
2) Solenoid valve operation in three modes that is,
a) timer mode
b) sensor mode
c) mixture mode (timer and sensor combine).
3) Saving data which will tell when the valve were operated.
4) Designing the in such a way that same activity can be performed from the PLC and also from HMI.
5) Representing moisture sensors data on HMI and operating valve according to the data taken from moisture sensor.
| Item Name | Type | No. of Units | Per Unit Cost (in Rs) | Total (in Rs) |
|---|---|---|---|---|
| Fatek PLC Fbs-60MA-R2 | Equipment | 1 | 20000 | 20000 |
| Weintek HMI 8071ip | Equipment | 1 | 20000 | 20000 |
| Fatek analog module Fbs-B4AD | Equipment | 1 | 6500 | 6500 |
| PLC cable IH | Miscellaneous | 1 | 1500 | 1500 |
| PLC cable IP | Equipment | 1 | 1500 | 1500 |
| Moisture sensor | Equipment | 5 | 200 | 1000 |
| Solenoid valve | Miscellaneous | 3 | 1800 | 5400 |
| voltage to current converter | Miscellaneous | 3 | 450 | 1350 |
| VeroBoard | Equipment | 3 | 80 | 240 |
| powersupply | Miscellaneous | 2 | 800 | 1600 |
| Weintek CMT for using mobile as HMI | Equipment | 1 | 20750 | 20750 |
| Total in (Rs) | 79840 |
Electroencephalography is a method of monitoring electrical activity in the human brain. W...
An in-pipe robot to be developed that can autonomously travel through a network of pipes a...
RotiMAK is the Final Year Student Project of Mechanical Engineering Student of Mehran Univ...
Introduction of the Complete Project: Our major aim is to design a High-Speed Target...
Weather and climate has a strong influence on food production and crop yield in terms of c...