we have to design a sensor system that measures the tilt angle -+15 degrees. this tilt sensor should be designed for heavy machinery and should be accurate. we have to show simulation in software as well as in hardware. our main goal is to build a unique inclinometer that is sustainable for a long t
tilt sensor for trunnion gun
we have to design a sensor system that measures the tilt angle -+15 degrees. this tilt sensor should be designed for heavy machinery and should be accurate. we have to show simulation in software as well as in hardware. our main goal is to build a unique inclinometer that is sustainable for a long time and it should be rugged for use in armed vehicles.
our objective is to design a tilt sensor system that is a precise gravity referenced servo inclinometer that can be used for a wide variety of industrial and military applications. this system should be rugged and sustainable. it should have excellent temperature insensitivity and it should be shock and vibration resistant.
high precision 2 axis (x and y) gravity referenced servo inclinometers suitable for both military and industrial applications. implementation will be demonstrated on software as well as the hard form will be checked on reference desk systems
the benefits of this project are as follows:
1.Level control of machines and structures.
2. Safety control of cranes and lifting equipment.
3. Civil engineering studies
4. military applications.
the final deliverables of our fyp project are as follows:
1. Fully self-contained - connect to a DC power source and a readout or control device for a complete operating system.
2. High-level DC output signal proportional to the sine of the angle of tilt.
3. ±14.5° range.
4, Total electrical isolation between axes.
5.High accuracy specification Input voltage ±15 VDC; output signal ±5 VDC.
| Item Name | Type | No. of Units | Per Unit Cost (in Rs) | Total (in Rs) |
|---|---|---|---|---|
| servo gmeter | Equipment | 2 | 1000 | 2000 |
| accelarometer | Equipment | 2 | 1000 | 2000 |
| outter shell | Miscellaneous | 2 | 500 | 1000 |
| screws and sleeves | Miscellaneous | 2 | 500 | 1000 |
| internal wires and clippings | Miscellaneous | 2 | 500 | 1000 |
| 7pin input and output | Equipment | 2 | 500 | 1000 |
| Total in (Rs) | 8000 |
The main problem that we face every day in the streets, highways, is the accidents. The pe...
The purpose of our project is to build a hand gesture recognition system that will provide...
ROBO'S BLIND is an Robotic stick for the blind person which will help them to perform any...
Summary: "Hybrid System Power Utilization With Load Management" the project is based on th...
As today the main problem of our country is electoral fraud (Rigging) in election. So the...