Symptomatic COVID Testing Device

Project Title

Symptomatic COVID Testing Device

Project Area of Specialization Electrical/Electronic EngineeringProject Summary

The basic aim of this project is to develop a corona testing kit to check different symptoms and it is basically used as an early detection procedure. In this whole testing scenario it will monitor temperature, oxygen saturation, blood pressure, respiratory rate, and pulse. As the world is facing a huge  economic recession  due to this pandemic  (corona virus) and  the  whole  world is focused on providing a good solution to this  issue some are  working on the vaccine and others are working to provide suitable tools to cater this problem. Keeping this  scenario in mind, we are going to work on a COVID-19 symptomatic kit that will help patients to detect the initial corona symptoms by checking the  vitals of the patient and the detection procedure will be carried out, it can be used at different places or in different departments as a whole testing to check the patients We are focused on making a low cost kit that is rarely available anywhere in the world, separate testing measures are available but not in the form of one device so  our primary focus is to embed this whole system in one device We are trying to make this easy and user friendly so it can be used by person of any background. Objective of the project is the provide a suitable tool which can help to cater this problem to some extent. Keeping the fact in mind that this pandemic will not live forever we cannot assume that it is over, so our objective is to work on the suitable tool and extract a valuable kit that can be helpful in future if the same scenario arrives. We have seen previously that different pandemic arose and after some period it vanished but were not completely vanished , So keeping this fact in mind, we are highly passionate to work on this tool and make our contribution to this whole epidemic trauma.

Project Objectives

The pandemic is at its peak and people are not following SOPs due to which they are catching covid-19 to a great extent. We are developing this kit to have a less exposure with the paramedical staff as more people going for testing purpose and as exposed to covid-19 more, this kit will help them monitor themselves at home and if they are alerted with covid-19 symptoms they are instructed to get quarantined instead of going for quick testing where they will be exposed to covid-19 and if symptoms get worse then to go for a check up or test.

Moreover, in addition to this accuracy of results are highly targeted in this device as accurate results are key to this, measuring  the vitals accurately is the key here in order to predict as we are working on the detection of 5 symptoms that include

• Temperature
• Spo2
• Blood pressure
• Pulse
• Heart rate

These symptoms are to measured accurately before predicting. There might be chance that patient is not having covid-19 but the machine is predicting and he or she get worried so in order to avoid this we are targeting  to attain high level of accuracy

In addition, our product is a complete package in the form of kit which is embedded with all the measuring devices. previously we had measuring devices but separate we however embedded it in one complete device to make it easy for patient to measure instead of getting separate readings. This would help reduce a burden of different components on patient as well he would like to go with this compact device

This is complete marketing project in this recent pandemic situation. This project predicts COVID based on of initial symptoms. Everybody in this pandemic wants to know he or she may or may not affected by COVID-19, so this is a complete package to observe him or herself. Prize of project is very limited so in the range of every person. This device is used in hospitals as well as personal use. And its results are faster and on run time, so this device is not time consuming. By purchasing this device, you observed yourself about COVID on run time.

Project Implementation Method

Hardware+software

1.The implementation of our projetc is that raspberry pi will recieve the data from temperature,heart rate,oxygen saturation,blood pressure and respiratory rate sensors.

2.raspberry pi send the data to webpage.

Benefits of the Project

•After completing Hardware, we conclude that these sensors are good for earlier detection of COVID-19. we connected the raspberry pi to laptop by using different software such as  advance IP scanner, mobaxterm.

•This device will bring advancement in medical field.

•This device will be beneficial for a medical  field.

Technical Details of Final Deliverable

Raspberry pi 3:

Processor • Broadcom BCM2387 chipset. • 1.2GHz Quad-Core ARM Cortex-A53 (64Bit) 802.11 b/g/n Wireless LAN and Bluetooth 4.1 (Bluetooth Classic and LE) • IEEE 802.11 b / g / n Wi-Fi. Protocol: WEP, WPA WPA2, algorithms AES-CCMP (maximum key length of 256 bits), the maximum range of 100 meters. , symmetric encryption algorithm Advanced Encryption Standard (AES) with 128-bit key, the maximum range of 50 meters. GPU • Dual Core Video Core IV® Multimedia Co-Processor. Provides Open GL ES 2.0, hardware-accelerated Open VG, and 1080p30 H.264 high-profile decode. • Capable of 1Gpixel/s, 1.5Gtexel/s or 24GFLOPs with texture filtering and DMA infrastructure Memory • 1GB LPDDR2 Operating System • Boots from Micro SD card, running a version of the Linux operating system or Windows 10 IoT Dimensions • 85 x 56 x 17mm Power • Micro USB socket 5V1, 2.5A Connectors: Ethernet • 10/100 BaseT Ethernet socket

DS18B20

Tempreture sensor used for body tempreture measuments.

The DS18B20-PAR digital thermometer provides 9 to 12–bit centigrade temperature measurements and has an alarm function with nonvolatile user-programmable upper and lower trigger points. The DS18B20-PAR does not need an external power supply because it derives power directly from the data line (“parasite power”). The DS18B20-PAR communicates over a 1-Wire bus, which by definition requires only one data line (and ground) for communication with a central microprocessor. It has an operating temperature range of –55°C to +100°C and is accurate to ±0.5°C over a range of –10°C to +85°C. Each DS18B20-PAR has a unique 64-bit identification code, which allows multiple DS18B20-PARs to function on the same 1–wire bus; thus, it is simple to use one microprocessor to control many DS18B20- PARs distributed over a large area. Applications that can benefit from this feature include HVAC environmental controls, temperature monitoring systems inside buildings, equipment or machinery, and process monitoring and control systems.

MAX30102:

sensor used for oxygen saturation and heart rate measurment.

MAX30102 is an integrated pulse oximetry and heart-rate monitor sensor solution.It integrates two LEDs (IR and Red), a photodetector (visible + IR), optimized optics, and low-noise analog signal processing to detect pulse oximetry and heart-rate signals.

Final Deliverable of the Project HW/SW integrated systemCore Industry MedicalOther IndustriesCore Technology Internet of Things (IoT)Other TechnologiesSustainable Development Goals Good Health and Well-Being for PeopleRequired Resources

Item Name	Type	No. of Units	Per Unit Cost (in Rs)	Total (in Rs)
			Total in (Rs)	22391
Raspberry pi 3	Equipment	1	6500	6500
MAX30102	Equipment	1	650	650
DS18B20	Equipment	1	450	450
SUNROM	Equipment	1	3009	3009
piezoresistive sensor	Equipment	1	1782	1782
MISCELLANEOUS	Miscellaneous	1	10000	10000