Soldier Health Monitoring and Position Tracking system
Make an Intellegent system that monitor soldier health and inform the concern official to immediate action that is army basestation and track the soldier position with time. Basically we are using this module to implement it on military to help the soldier. With this module we will be able to access
2025-06-28 16:36:05 - Adil Khan
Soldier Health Monitoring and Position Tracking system
Project Area of Specialization Computer ScienceProject SummaryMake an Intellegent system that monitor soldier health and inform the concern official to immediate action that is army basestation and track the soldier position with time. Basically we are using this module to implement it on military to help the soldier. With this module we will be able to access the current GPS position of soldier and also monitor the health status and body temperature as well as heartbeats. So that we can send instent help to the soldier and rescue him quickly.
Project ObjectivesTo design a system for monitoring vital signs of a person.
To Facilitate the co ordination between soldier and commanding officer.
To create awareness of the situation.
To Provide surveillance.
To Design a Prototype for the demonstration.
Project Implementation MethodFirst Phase
- Planning,Learning,Searching and Collecting information about Military and Sensors.
Seconf Phase
- Designing,Sketching,Simulating the system in Proteus and Fritzing.
Third Phase
- Hardware collection,Assembly of hardware and testing.
Final Phase
- Implementation in Arduino architecture and its programming with required sensors.
Benefits are that we can easily access to soldier with this module and also we will know about the current position and body temprature. So that if he is in critical condition than we can send help immediately to the soldier. It also help the soldier to send alert messages to the basestation for help.
Technical Details of Final DeliverableRequired hardware components
Following are our required hardware components
- Controller (Uno AT328p)
- Pulse sensor
- Temperature sensor (DS 18B20)
- Gsm module (Sim 900A)
- Gps module
- Serial converter for 16*2 Lcd
- 16*2 Lcd display
- Push Button
Software Required
- Protecus simulation and designing software
- •Arduino ide
| Item Name | Type | No. of Units | Per Unit Cost (in Rs) | Total (in Rs) |
|---|---|---|---|---|
| Total in (Rs) | 31200 | |||
| Controller Uno | Equipment | 2 | 1000 | 2000 |
| LCD Display 16 | Equipment | 2 | 600 | 1200 |
| Serial Converter | Equipment | 2 | 400 | 800 |
| GSM module sim(900) | Equipment | 2 | 3000 | 6000 |
| GPS Module | Equipment | 2 | 3000 | 6000 |
| Pulse Sensor | Equipment | 2 | 800 | 1600 |
| Temperature Sensor | Equipment | 2 | 300 | 600 |
| DC power Supply | Equipment | 2 | 1000 | 2000 |
| 12volt 3ampere lipo Battery | Equipment | 2 | 3000 | 6000 |
| Lipo battery charger | Equipment | 1 | 1500 | 1500 |
| Connecting wires, Male to female and Female to male and Others | Equipment | 1 | 1500 | 1500 |
| Delivery Charges | Miscellaneous | 1 | 2000 | 2000 |