Smart Bike Automated Meter
As the world is evolving rapidly and digitalizing everything, why not have smart bike devices that make our lives easier? An efficient digital automatic bike meter (based on IOT) Moreover, this IOT-integrated bike and vehicles will create new and different information and cyber security risk that co
2025-06-28 16:35:06 - Adil Khan
Smart Bike Automated Meter
Project Area of Specialization Internet of ThingsProject SummaryAs the world is evolving rapidly and digitalizing everything, why not have smart bike devices that make our lives easier? An efficient digital automatic bike meter (based on IOT) Moreover, this IOT-integrated bike and vehicles will create new and different information and cyber security risk that could make exiting safety solution in effective to exploits potential of IOT in an effective way, especially in bikers safety, using anti-theft system as they are designed to lift the complexity of robbery to an unimaginable one. This device will also monitor the speed of the bike. The level of remaining fuel will also be indicated. All the parameters will be displayed on an LCD connected to GPS. Another highlighting feature of this meter provides pop-up alerts linked to every call or messages on your phone so that when riding the bike you do not have to risk your life. It will also reveal whether your engine is heating up. The meter will also reflect the need to alter the oil.
Project ObjectivesOur aim is to design and implement a smart bike automatic meter which:
- Measures fuel level
- Displays bike temperature
- Displays surrounding temperature and humidity
- Indication of engine heat-up
- Anti-theft security system
- GPS system
- Call and SMS notification
- Oil alteration
Phase-1 (Designing)
After Identifying the problem, well look for the best possible solution and then based on the solution we will design our hardware.
Phase-II (Testing)
We will test the sensors that we have selected for the hardware if they are giving accurate results or not.
Phase-III (Algorithm Designing)
After we have checked the functionality of our sensors, well design an algorithm for the indication of all the aims and objectives that we have discussed earlier.
Phase-IV (implementation)
We will implement the designed algorithm on our system to verify it is working.
Phase-V (Evaluation):
We will evaluate our system on the basis of its performance and will figure out maximum ways to make it cost effective and increase its efficiency.
Benefits of the ProjectPublic awareness and safety are one of the most important confrontations in the place of effective welfare for the bikers, and now a day’s bike is the important thing in daily life it is too much critical to make the bike secured day by day majority of people that are riding a simple bike which has no feature than riding, and majority of accidents are a major cause of death and disability. Sometime accidents are a major cause of death and disability. So now without checking your phones and risking your life, you will be now safe. Usually when we over-ride our bikes, our engine seizes. In most cases, this comes from a lack of oil. In addition to situations where no oil seized up engines, this can also happen due to low oil so our meter will also show when the oil needs to alter. In addition to the all the above-mentioned function, this meter will also indicate if your fuel goes down from a certain level by sending a message on your phone which will also be displayed on the LCD.
Technical Details of Final Deliverable Software RequirementThere is an increasing demand to write the application program in a high-level language C. the reason behind it is that the embedded programs are complex so they are difficult to write in assembly language, processors are needed for more frequent re-adaption of application to new instructions of set and hence the lifespan of the processor model is decreased. The embedded software system on the Raspberry Pi has the following interfaces
- Camera input using a built-in library in Raspbian OS.
- Speed and turn data output to the raspberry pi.
- Direction and speed data input using built-in raspberry pi libraries.
Some of the hardware used in our project are: -
- Temperature sensor: - precision integrated sensor is used in which an output voltage is directly proportional to the temperature in centigrade
- Fuel sensor: - it is manufactured to our custom level requirement.
- Speedometer:- it is guage that measures the instantaneous speed of the vehicle.
- Keypad: - it is a set of keys having maximum eight number of keys arranged in a block.
- GPS:- it is a satellite -based navigation system works in any weather circumstances at anywhere
- LCD:- it will indicate the total amount, quantity, cost per kilometers, time, date, temperature.
- GSM: - a special wireless modem that used SMS to the vehicle indicating the owner about the present vehicle configuration like the total amount, quantity, cost per kilometers, time, date, temperature.
| Item Name | Type | No. of Units | Per Unit Cost (in Rs) | Total (in Rs) |
|---|---|---|---|---|
| Total in (Rs) | 67860 | |||
| Audino | Equipment | 1 | 6000 | 6000 |
| Raspberry Pie 3.8 | Equipment | 1 | 9500 | 9500 |
| 16 Gb Card | Equipment | 1 | 1500 | 1500 |
| Single Channel Relay | Miscellaneous | 1 | 90 | 90 |
| 7 inch's LCD + 5 JFT | Equipment | 1 | 22000 | 22000 |
| R-307 Finger Print | Miscellaneous | 1 | 5000 | 5000 |
| Mix 90614+DHD Mod | Equipment | 1 | 5700 | 5700 |
| UNO Smd | Equipment | 1 | 1200 | 1200 |
| Pi 4 care + fan | Miscellaneous | 1 | 850 | 850 |
| Pi heat sink | Miscellaneous | 1 | 150 | 150 |
| Pi 3 care orignal | Miscellaneous | 1 | 600 | 600 |
| Raspberry Pi 4 | Equipment | 1 | 14500 | 14500 |
| Ethernet+ Type C Cable | Miscellaneous | 1 | 300 | 300 |
| Reed Switch | Miscellaneous | 1 | 300 | 300 |
| SR 04 + Holder | Miscellaneous | 1 | 170 | 170 |