Safety System To Avoid Accident While Driver Is In Drowsiness

Project Title

Safety System To Avoid Accident While Driver Is In Drowsiness

Project Area of Specialization Mechanical EngineeringProject Summary

Safety is very critical in the automotive industry and it would be a vigorous proposition to have an innovative safety feature that would prevent the driver from falling asleep while driving. With the aid of today’s technology, photographic equipment can be used to recognize when the driver’s eyelid proceeds to mantle and Sclera/Pupil are no longer defined. The TTL serial camera module with NTSC video output will use the Raspberry pi with an Intel Curie microcontroller to send a signal to the driver seat. An unbalanced impeller could be utilized to receive the output data signal emerging from the microcontroller, which is wired to the data input of the impeller. The signal input will activate the impeller to vibrate the seat. Therefore, the driver is alert to the situation. This process can continue to be implemented until the eyes are recognized as opened again. This innovation will be essential when concerned about the safety and will decrease the rate of accidents due to the lack of contemplation. if the driver didn't wake up after the alarm it will tend to cut off the fuel supply to the vehicle and applies brakes gradually

Project Objectives

• the prototype should be able to detect drowsiness under every suitable condition.
• the blinking of eyes should be detected instantly. 

Project Implementation Method

• Programming of the micro-controller.
• Assembly of electronic components.
• Testing of the assembly.

Benefits of the Project

• To decrease number of accidents caused by drowsiness.
• Cost effective.
• Contribution to the automobile industry.

Technical Details of Final Deliverable

The prototype would be Raspberry pi base model that would able to detect drowsiness under every condition. Moreover, it would be a full fledge independent model that would work regardless of the environmental factors.

• Design and installation details for the microcontroller.
• Final working of the device.

Final Deliverable of the Project Hardware SystemCore Industry TransportationOther IndustriesCore Technology Artificial Intelligence(AI)Other TechnologiesSustainable Development Goals Good Health and Well-Being for People, Quality Education, Affordable and Clean Energy, Decent Work and Economic Growth, Industry, Innovation and Infrastructure, Sustainable Cities and Communities, Partnerships to achieve the GoalRequired Resources

Item Name	Type	No. of Units	Per Unit Cost (in Rs)	Total (in Rs)
			Total in (Rs)	79100
night vision camera	Equipment	1	49000	49000
raspberry pi	Equipment	1	17000	17000
wires	Equipment	5	100	500
motor	Equipment	2	1000	2000
alarm and indicators	Equipment	2	300	600
petrol	Miscellaneous	1	5000	5000
accessories	Miscellaneous	1	5000	5000