Adil Khan 1 year ago
AdiKhanOfficial #FYP Ideas

Run time implementation of self-mixing laser interferometric sensor for vibration measurement

Self-mixing (SM) laser interferometry also recognized as optical feedback (OF) laser interferometry has been extensively demonstrated for past two decades, due to its ability to provide a cost-effective, compact and self-aligned setup for many industrial applications involving measurement of vibrati

Project Title

Run time implementation of self-mixing laser interferometric sensor for vibration measurement

Project Area of Specialization

Artificial Intelligence

Project Summary

Self-mixing (SM) laser interferometry also recognized as optical feedback (OF) laser interferometry has been extensively demonstrated for past two decades, due to its ability to provide a cost-effective, compact and self-aligned setup for many industrial applications involving measurement of vibration, distance, displacement, and velocity. The self- mixing interferometry (SMI) phenomenon come into existence when emitted light from a laser diode (LD) strikes the surface of a moving target and a fraction of that laser beam reflect back from that target surface and reenters into the active laser cavity. This reentering beam interacts with the emitted beam, causing modulated kind of effect to the laser beam signal. This modulated change in a beam of light or also called SM signal is captured at photodiode embedded in the active laser cavity. This SM signal can be processed through some post-processing to extract the desired target motion. Therefore, many algorithms and methods were proposed to extract target motion from that SM Signal. But, most of them are only at simulation level and their real-time implementation is difficult to achieve due to extra-added optical components or long iterative and complex processing steps involved in different algorithms.  However, a fast real-time nature algorithm known as direct phase unwrapping method (DFUM) was proposed and analyzed for FPGA based implementation, but its implementation is also at the simulation level. In this work, DFUM is analyzed and its Arduino based implementation is done using Arduino Due board. We tested our implemented system for various simulated and experimental signals acquired through SMI for displacement retrieval and found out that our system has the capability to retrieve target displacement with approximately ?/10 precision while utilizing only 25KB of programmable memory of Arduino Board. Furthermore, our Implemented system has the capability to process SM signals with speed up to 1MS/s.  This low-cost implementation of such a fast algorithm is a key step towards an embedded sensor on a single chip capable of providing a solution for nano-metric displacement measurements.

Project Objectives

The purpose of this work is the real-time implementation for vibration retrieval algorithm direct phase unwrapping method  for self-mixing interferometry.

Such an implementation of SMI based vibration retrieval paves the way towards:

  • A complete digital SM sensor integration on chip
  • Real-time measurements for vibration and displacement applications in an embedded, autonomous manner for many industrial applicaions.

Project Implementation Method

Project implementation starts with Collection of Literature and Study of collected Literature from different sources. After basic understanding with the Self-mixing interferometry and its involvement in many industrial applications involving displacement, velocity and vibration measurement, the next step is to decide the algorithm to be implemented for real-time implementation. 

  • Once the scheme is selected (Direct phase unwrapping method is selected), the next step is its complete analysis before its real-time implementation. 
  • After the analysis, the next step is to propose an implementable model of DFUM.
  • Next target is the selection of hardware (Arduino Board selected) to implement that proposed Model.
  • Next step is Implementation of Schemes/Model
  • Then Analysis & Simulation followed by Result Formulation
  • The final phase is Write-up of the whole project

Benefits of the Project

cost-effective self-aligned easy to use embedded system design capable of sensing any remote target motion, which is useful for many manufacturing industries, fluid flow rate measurements, a biomedical field involving blood flow measurements and disease identification sonar and range finding applications.

Technical Details of Final Deliverable

Algorithm and code

  • Arduino IDE software is used to write script to program Arduino Board. DFUM is scripted in three different styles called as slow DFUM (SDFUM) medium DFUM (MDFUM) and fast DFUM (FDFUM) depending upon the sampling speed of SM signal.

Results

  • Successful hardware implementation of SMI algorithm for vibration retrieval
  •  Vibration retrieval with capability of processing upto 1MS/s SM signals.
  • This then means capability of retrieving target vibration upto maximum speed of 39.25 mm.

Hardware

  • Arduino Due is used for real-time implementation of DFUM. Arduino Due is an Arm 32 bit microcontroller based Arduino board, which has total of 68 input/output pins out of which, 12 are analog input pins with 12 bit resolution, 54 digital I/O pins and two analog output pins with 12 bit resolution. Therefore, it has the capability of handling analog input and providing analog output.

  • Arduino Due has total of 512 KB of flash memory available for user applications and has 96 KB of SRAM. Similarly, it has a clock speed of 84 MHz to support fast processing as compare to other Arduino boards.

Final Deliverable of the Project

HW/SW integrated system

Type of Industry

Medical , Manufacturing , Security , Telecommunication

Technologies

Artificial Intelligence(AI), Others

Sustainable Development Goals

Industry, Innovation and Infrastructure

Required Resources

Item Name Type No. of Units Per Unit Cost (in Rs) Total (in Rs)
Arduino Due Board Equipment150005000
SM Sensor Interfacing Cables/Connectors and jumper wires Equipment11500015000
printing etc Miscellaneous 150005000
Total in (Rs) 25000
If you need this project, please contact me on contact@adikhanofficial.com
0
227
Design and Fabrication of Mini Archimedes Screw Hydel Turbine

Pakistan has still not fully utilized the low head potential of its river,canals, conduits...

1675638330.png
Adil Khan
1 year ago
design and development of an open source quadcopter for disaster manag...

This project deals with the design and development of an open-source quadcopter for disast...

1675638330.png
Adil Khan
1 year ago
Mobile Application for Handwritten marks Recognizer and GPA calculator

No summary Project Objectives (less than 2500 characters)

1675638330.png
Adil Khan
1 year ago
A flexible and programmable Digital Radio Mondiale

The analog transmission using AM (Amplitude Modulation) and FM (Frequency Modulation) tech...

1675638330.png
Adil Khan
1 year ago
First person terrorist Attack game

The name of our gaming project is ?First Person Terrorist Attack Game (Made with unity) ?....

1675638330.png
Adil Khan
1 year ago