Rectenna Systems For RF Energy Harvesting
Our project is divided in two parts: 1: Antenna 2: Rectifier Circuit 1: Antenna: We are using microstrip patch antenna as our main source of electromagnaticc waves. 2: Rectifier Circuit: Rectifier is subdivided in three part
Project Title
Rectenna Systems For RF Energy Harvesting
Project Area of Specialization
Project Summary
Our project is divided in two parts:
1: Antenna
2: Rectifier Circuit
1: Antenna:
We are using microstrip patch antenna as our main source of electromagnaticc waves.
2: Rectifier Circuit:
Rectifier is subdivided in three parts:
i: Low Pass Filter
ii: Matching Network (Impedence Matching)
iii: Rectification
How the Project Will Work?
The Antenna will recieve RF waves from air and space and will convert them to AC. We then will filter the unwanted frequencies using LPF. Then we will be matching the impedence to attain maximum power transfer. After this we will convert the AC signal to DC to use it for required load.
Project Objectives
- Design an Microstip Patch Antenna.
- Design a rectifier circuit to convert RF waves to use for DC purposes.
- Designing an array of antenna to analyze the increase in recieved power.
- Implementing the recieved power to a specific load.
Project Implementation Method
- Designing Microstrip Patch Antenna
- Designing Rectifier Circuit
- Designing Array
Benefits of the Project
- It is a clean source of energy.
- If we will be successful in achieving a good amount of power it will be a great achievment.
- It can be used on large scale to produce large amount of power.
Technical Details of Final Deliverable
- A Rectenna with single antenna.
- A Rectenna with antenna array.
Final Deliverable of the Project
Core Industry
Other Industries
Core Technology
Other Technologies
Sustainable Development Goals
Required Resources
| Item Name | Type | No. of Units | Per Unit Cost (in Rs) | Total (in Rs) |
|---|---|---|---|---|
| Double Sided Copper Plates (FR4)) | Equipment | 10 | 350 | 3500 |
| Diodes | Equipment | 5 | 50 | 250 |
| Port | Equipment | 4 | 300 | 1200 |
| Total in (Rs) | 4950 |
If you need this project, please contact me on contact@adikhanofficial.com
Human Facial Action Unit Tracking
This project is for disabled users and industries where they can collaboratively work. In...
DESIGN OF AESA RADAR TR MODULE USING COTS COMPONENTS
Radar is a detection system that uses radio waves to determine the range, angle, or veloci...
IoT Based Semi Autonomous Vehicle using Computer Vision
The goal of the project is to design and fabricate a semi autonomous vehicle that will be...
Automobile Repairing Through IT Services Home City
We are going to create a company in our home city because these IT services will also avai...
Monitoring and Controlling of an Hybrid Energy System by using IOT Tec...
We have fouced on controlling and monitoring of hybird energy system based on Renewa...