Prepaid energy meter with theft detection

The prepaid energy meter with theft detection system mainly works fpr detecting internal as awell as external energy theft. Internal energy theft occurs after the energy reaches to the energy meter. External energy theft occurs before the energy reaches to the energy meter. When

Project Title

Project Area of Specialization

Electrical/Electronic Engineering

Project Summary

The prepaid energy meter with theft detection system mainly works fpr detecting internal as awell as external energy theft.

Internal energy theft occurs after the energy reaches to the energy meter.

External energy theft occurs before the energy reaches to the energy meter.

When the exterrnal or internal theft occur in the system the immediately inform authority or user with message also system will able to send message when prepaib balnce is zero or low.

Project Objectives

One popular theft detection method, implementedin most meter data mangement systems(MDMS), is to estimate the amount of total losses as described above, by performing energy balnce bwtween the energy supplied by the DT and the energy consumed by all metered users, and calculate the loss rate as a percentage.

Project Implementation Method

The project presents a robust system will allow the consumer to use electricity by making payment in prepaid manner, just like the recharge of a mobile SIM is carried out. The user can recharge his/her system account by sending a simple SMS to the system. This SMS recharges the user's account. The system also senmds alerts to the user in case of low balance in the system to remind the user to recharge . The system cuts off the power supply when the balnce of the system falls to zero based upon calculation of the amount of electricity being consumed by the load.

Benefits of the Project

The main advantage of this project is its low cost solution for prepaid metering of electricity usage and also stops theft of electricity at hjousehold level. The facility of tamper detection stops any intrusions by the user into the electricity meter to alter or stop the calculation of units being consumed.

Technical Details of Final Deliverable

The system works for theft detctionand also allows user to use bprepaid energy meter functionality.

Using this functionality user will able to pay in advance and use exact amount of energy.

The system starts with GSM modem connection and first configures the user number and gives authority to that number.

The system is made up of AVR Microcontroller, current sensors, GSM Modem, LCD display, energy meter and loads.

Final Deliverable of the Project

HW/SW integrated system

Core Industry

Others

Other Industries

Energy

Core Technology

Internet of Things (IoT)

Other Technologies

Others

Sustainable Development Goals

Affordable and Clean Energy, Decent Work and Economic Growth

Required Resources

Item Name	Type	No. of Units	Per Unit Cost (in Rs)	Total (in Rs)
Atmega Microcontroller	Equipment	4	2500	10000
current sensor	Equipment	6	350	2100
SIM 800 GSM Module	Equipment	2	5700	11400
LCD Display	Equipment	2	2500	5000
Relay	Equipment	4	800	3200
Relay Driver IC	Equipment	5	50	250
Vtg Regulator IC	Equipment	6	35	210
Crystal Oscillator	Equipment	6	20	120
Resistors	Equipment	20	10	200
Capacitors	Equipment	20	10	200
Transistors	Equipment	20	50	1000
cables	Equipment	50	30	1500
Diodes	Equipment	20	150	3000
PCB	Equipment	4	200	800
LED	Equipment	10	10	100
Breadboards	Equipment	8	150	1200
Connectors	Equipment	20	40	800
Transformer/adapter	Equipment	4	400	1600
Push Buttons	Equipment	10	10	100
Switch	Equipment	10	30	300
IC	Equipment	20	350	7000
IC Sockets	Equipment	20	31	620
Energy Meter	Equipment	1	15000	15000
Loads	Equipment	3	500	1500
Arduino	Equipment	2	1400	2800
Printing (thesis)	Miscellaneous	5	1000	5000
Stationery	Miscellaneous	9	100	900
			Total in (Rs)	75900