power Generation using funnel wind turbine
The main theme and research behind this project is to decrease the load on the utility grid by generating the electrical power by the renewables energy sources. The current power sources are not enough to cope with the demand of the consumers to overcome this problem the proposed idea is presented f
2025-06-28 16:34:33 - Adil Khan
power Generation using funnel wind turbine
Project Area of Specialization Electrical/Electronic EngineeringProject SummaryThe main theme and research behind this project is to decrease the load on the utility grid by generating the electrical power by the renewables energy sources. The current power sources are not enough to cope with the demand of the consumers to overcome this problem the proposed idea is presented for the generation of the green energy. The proposed idea is basically for the generation of the green and the enviorment friendly energy using the one of the latest wind turbine design known as the Funnel wind turbines design. The proposed design has a very good efficiency as compared to the ordinary wind turbine design like VAWT and the HAWT design.
Project ObjectivesThe aim and the objectives of the project is listed below.
- To generate the green and the free of cost electrical energy
- To provide the electrical power to the remote areas
- To Decrease the load on the utility grid system
- To decrease the electricity bill
To increase the continuity of the electrical supply
The implementation of this project is listed below
- Wind turbine
- Funnel design
- Dc Generator
- Step down transformer
- Bridge Rectifier
- Diodes
- Capacitors
- Storage Batteries
- Dc voltmeter
- Inverter
- Base of hardware
- Dc voltmeter
- Arduino
- LCD Screen
- I2c Module
- Connecting wires
The banefits and the objectives of the proposed hardware is listed below.
- To generate the green and the free of cost electrical energy
- To provide the electrical power to the remote areas
- To Decrease the load on the utility grid system
- To decrease the electricity bill
- To increase the continuity of the electrical supply
The research of this project will be start straight away after the acceptance of the proposal research will remain continue until we achieve our goal and finally we will write a report on the hardware and discuss all the details of the hardware and consul ions in detail. The block diagram of the project showing the clear and the authentic information about the working of this hardware in which the kinetic energy from the wind is converted into the electrical energy by the means of the wind turbine and transferred to the utility grid to provide the electrical power to the consumers.
| Item Name | Type | No. of Units | Per Unit Cost (in Rs) | Total (in Rs) |
|---|---|---|---|---|
| Total in (Rs) | 60800 | |||
| wind Turibine | Equipment | 1 | 10000 | 10000 |
| wind Turbine wings | Equipment | 3 | 4000 | 12000 |
| Dc Generator | Equipment | 1 | 3000 | 3000 |
| step down Transformer | Equipment | 1 | 2000 | 2000 |
| Diodes | Equipment | 4 | 200 | 800 |
| Capacitors | Equipment | 6 | 1000 | 6000 |
| Bridge Rectifier | Equipment | 4 | 500 | 2000 |
| Dc volt meter | Equipment | 1 | 500 | 500 |
| inverter | Equipment | 1 | 2000 | 2000 |
| Arduino | Equipment | 1 | 8000 | 8000 |
| LCD Screen | Equipment | 2 | 3000 | 6000 |
| 12c Module | Equipment | 1 | 6000 | 6000 |
| Connecting wires | Equipment | 5 | 500 | 2500 |