Power Electronics trainer
Power electronic trainers are the basic necessity of every power electronic lab these trainers provide sufficient knowledge of the behavior and characteristics of power-semi-conductor devices such as SCR, TRIAC, etc. Power electronic trainers are being widely used in various engineering universities
Project Title
Power Electronics trainer
Project Area of Specialization
Project Summary
Power electronic trainers are the basic necessity of every power electronic lab these trainers provide sufficient knowledge of the behavior and characteristics of power-semi-conductor devices such as SCR, TRIAC, etc. Power electronic trainers are being widely used in various engineering universities of Pakistan however the problem is that these trainers are imported from foreign countries at a high price point. This project seeks to manufacture the same modules at an affordable price point.
Project Objectives
- Manufacture 4 Modules of a Power Electronics Trainer
- Cost Reduction.
- To Make a Variable Frequency Drive by inter connecting all the modules.
Project Implementation Method
- Module Selection
- Identification of the Components
- Tracing of the Circuit
- Troubleshooting on vero board
- PCB Printing
- Components Soldering
These Steps were followed for all the modules.
Benefits of the Project
- Cost Effective
- Easy After Sales Service
- Beneficial for Educational Purposes
- Behavioral Analysis of several Power Electronic Devices
Technical Details of Final Deliverable
- SCR/TRIAC Module
- Reference Variable Generator
- IGBT Drive Set
- Single Phase PWM Controller
All these Modules Combine to form a Variable Frequency Drive and they will be presented in a form of trainer.
Final Deliverable of the Project
Type of Industry
Technologies
Sustainable Development Goals
Required Resources
| Item Name | Type | No. of Units | Per Unit Cost (in Rs) | Total (in Rs) |
|---|---|---|---|---|
| SCR | Equipment | 1 | 30 | 30 |
| TRIAC | Equipment | 1 | 25 | 25 |
| Inductor | Equipment | 1 | 25 | 25 |
| Copper Clad Board | Equipment | 1 | 200 | 200 |
| Ferric Chloride | Equipment | 1 | 70 | 70 |
| Drill | Equipment | 1 | 600 | 600 |
| Two Way Switch | Equipment | 4 | 25 | 100 |
| Resistors | Equipment | 6 | 2 | 12 |
| CT60-AM | Equipment | 4 | 600 | 2400 |
| IR2130-DIP | Equipment | 2 | 800 | 1600 |
| Vero Board | Equipment | 1 | 70 | 70 |
| IC Base (28 pin) | Equipment | 1 | 10 | 10 |
| IC base (14 Pin) | Equipment | 3 | 3 | 9 |
| Diode (1N4007) | Equipment | 6 | 1 | 6 |
| Crystal LED | Equipment | 3 | 2 | 6 |
| Resistor | Equipment | 37 | 1 | 37 |
| Capacitor | Equipment | 12 | 8 | 96 |
| Potentiometer | Equipment | 3 | 20 | 60 |
| Jumper | Equipment | 7 | 10 | 70 |
| 40 Pin IC Base | Equipment | 1 | 10 | 10 |
| Voltage Regulator | Equipment | 1 | 15 | 15 |
| 7107 | Equipment | 1 | 150 | 150 |
| 7805 | Equipment | 1 | 15 | 15 |
| TL431 | Equipment | 1 | 15 | 15 |
| LM324 | Equipment | 2 | 15 | 30 |
| Resistor Sheet | Equipment | 1 | 50 | 50 |
| Capacitor Sheet | Equipment | 1 | 100 | 100 |
| CT60AM | Equipment | 2 | 600 | 1200 |
| IR2130 | Equipment | 2 | 800 | 1600 |
| 74HC244N | Equipment | 1 | 45 | 45 |
| 74LS14 | Equipment | 2 | 35 | 70 |
| 6N137 | Equipment | 4 | 40 | 160 |
| LM7805 | Equipment | 1 | 15 | 15 |
| Soldering Wire | Equipment | 1 | 225 | 225 |
| 4148 | Equipment | 12 | 3 | 36 |
| 4007 | Equipment | 12 | 2 | 24 |
| Interim Report Printing | Miscellaneous | 1 | 500 | 500 |
| Final Report Printing | Miscellaneous | 1 | 1500 | 1500 |
| Data Sheet Printing | Miscellaneous | 15 | 100 | 1500 |
| PCB Printing | Equipment | 4 | 10000 | 40000 |
| Melamite Sheet | Equipment | 2 | 4500 | 9000 |
| Aluminium Frame | Equipment | 1 | 7900 | 7900 |
| Boxes | Miscellaneous | 4 | 1000 | 4000 |
| Screen Printing | Miscellaneous | 4 | 500 | 2000 |
| Total in (Rs) | 75586 |
If you need this project, please contact me on contact@adikhanofficial.com
Three Phase IPM Based Motor Driver
In this project we generate 3phase of 310Vpp by intelligent power module (IPM) to drive a...
Face Mask Based Automatic Door System to ensure COVID-19 Precautionary...
This project intends to create an automatic system that identifies face masks and controls...
Anomaly Detection through Transfer Learning in Agriculture and Manufac...
IoT systems have been facing increasingly sophisticated technical problems due to the grow...
Three Dimensional Robotic Lifter Using Gesture Controlled Glove
The 3-d gesture-controlled robot will use the mechanism of CNC machine for motion in...