Designing of a multiband frequency reconfigurable antenna by using a diode in which frequency band around 2.6GHz ,3.4GHz and 4.8GHz are used. The frequecies are switched by using a diode and desired freque
Multi-Band Frequency Reconfigurable Micro-strip Antenna
Designing of a multiband frequency reconfigurable antenna by using a diode in which frequency band around 2.6GHz ,3.4GHz and 4.8GHz are used.
The frequecies are switched by using a diode and desired frequencies are used as per requirement on a single and compact sized antenna
With the rapid development of the modern wireless communications, such as GPS, Bluetooth, Wi-Fi etc. which operate on different frequency bands so different kind of antennas operating on different frequencies are required to utilize these applications..There is some times requirement of switchting from public to private networks. This will enhance the cost and size of the antennas. So there is a requirement of a system which can incorporate all these communication standards into single antenna of small size and affordable price.
The ultimate goal of our FYP is to design a compact reconfigurable antenna that can excite multiple-band operation combining different communication standards simultaneously into a single device
Antenna is designed on the software HFSS and results are measured in it.Fabrication of antenna is under proess the results will be done once the fabrication is done.
Antna can be implemented in following fields
Antna can be used for
The proposed antenna consists of 3 monopole radiators, 3 rectangular tuning strips, and a microstrip feed line. With these structures employed, the antenna can generate three different frequencies while maintaining low profile and simple structure. To verify the results simulated, a sample of this antenna is designed, fabricated, and tested. The simulated and measured return losses, radiation patterns are presented
antenna dimensions are 20mm x 28mm
material used for antenna is copper
metrial used for substrate is FR4-epoxy which is a lossy one to improve the losses a new substrate is needed to be imported which is expensive one.so to get better results RT/Duroid 5870 substrate is requied.
microstrip patch antenna is used and to reconfigure the three bands a pin diode and RF choke ADCH 80A are used
| Item Name | Type | No. of Units | Per Unit Cost (in Rs) | Total (in Rs) |
|---|---|---|---|---|
| PCB | Equipment | 5 | 2000 | 10000 |
| Pin Diode | Equipment | 10 | 750 | 7500 |
| RT/duroid 5870 sheet | Equipment | 2 | 13000 | 26000 |
| RF chokes | Equipment | 10 | 2600 | 26000 |
| Fabrication | Miscellaneous | 5 | 1500 | 7500 |
| Results measurments | Miscellaneous | 5 | 500 | 2500 |
| Total in (Rs) | 79500 |
Epilepsy may stem from changes in the brain?s development, wiring, or chemicals. Doctors d...
Solar power is the fastest-growing means of renewable energy. The project is designed and...
A Namaz app for Sync Jamat timings Project Objectives (less than 2500 characters)
In this project we design a smart cap which is used to prevent the incident occure i...
Textile and garment industries are one of the essential parts of human existence as they a...