Military Spy And Bomb Disposal Robot
In Military Spying & Bomb Disposal Robot in android project we are going to merge two applications that is spying and bomb detection. The Mini Spy Robot is small robot with a camera attached to it. The motors will be run by the relays which will be then controlled through Remote via RF module. T
2025-06-28 16:34:07 - Adil Khan
Military Spy And Bomb Disposal Robot
Project Area of Specialization Internet of ThingsProject SummaryIn Military Spying & Bomb Disposal Robot in android project we are going to merge two applications that is spying and bomb detection. The Mini Spy Robot is small robot with a camera attached to it. The motors will be run by the relays which will be then controlled through Remote via RF module. The work is designed to develop a War field robot which is capable of detecting bombs land mines in its path and which is wirelessly controlled through RF module. It is used to monitor the Warfield. The robot can be moved in all the directions using the remote wirelessly. The robot system is also used for bomb detection. And another thing which we are adding in our spy robot that is to make a frequency jammer which jam frequency according to certain range. Military Spying & Bomb Disposal Robot management report in android.It detects the RF data send by transmitter and according to that control robot in Forward, backward, left turn, right turn movements. Metal/Bomb detector can detect the metals and alert with LED to notify the Metal/Bomb .Because, we can’t detect the actual bomb we don’t have thatmuch authority .The camera detects the exact location of the robot. In this manner our project plays a crucial role in Military as well as in ourpolice department.
Project ObjectivesThe goal of this project is basically try make such thing or robot which is specially helpful for military defense and spy agencies to monitor or detect the harmful activities or weapon e.g bomb/metal and work as a frequency jammer in a certain range of robot. Our project will mainly focus on the following objectives:
Project Implementation MethodAndroid is the most popular operating system used in mobile. In this paper, we have developed an android application to control the movement of robotic system Blue Control is a basic universal Remote Control for Blue-Tooth enabled serial devices such as Blue Tooth modules connected to ARM. Frequency jammer For any jammer circuit, it’s essential to have three important sub circuits. RF amplifier Voltage Controlled Oscillator Tuning circuit The use of different frequencies makes it difficult to have a jammer for all frequencies. However, the below mentioned formula can be used to calculate the required values. F= 1/ (2*pi*sqrt (L1*C1)) Working RF amplifier circuit comprises of the transistor Q1, capacitors C4, C5 and resistor R1. This RF circuit amplifies the signal generated by the tuned circuit. The amplified signal is given to the antenna through capacitor C6. It blocks DC and allows only the AC component of the signal to be transmitted. When transistor Q1 is turned ON, the tuned circuit at the collector turns ON. The tuned circuit consists of capacitor C1 and inductor L1. This acts as an oscillator with zero resistance. It produces very high frequency with minimum damping. When the circuit is ON, voltage is stored in the capacitor. Once the capacitor is completely charged, it allows charge to flow through the inductor. When current flows through the inductor, it stores magnetic energy corresponding to the voltage across the capacitor. At a certain point, the inductor reaches its maximum and the charge or voltage across the capacitor turns to zero. Now the magnetic charge through the inductor decreases and the current charges the capacitor in opposite or reverse polarity. The process repeats and after a while, inductor charges the capacitor and becomes zero. This process runs till internal resistance is generated and the oscillations stop. RF amplifier feed is given through capacitor C5 to the collector terminal before C6. The capacitors C2 and C3 generate pulses in a random fashion (noise) at the frequency generated by the tuned circuit. The RF amplifier boosts the frequency generated by the tuned circuit. The frequency generated by the tuned circuit and the noise signal generated by the capacitors C2 and C3 is combined, amplified and transmitted.
Benefits of the ProjectUnmanned Ground Vehicle (UGV): They are used for ground purposes. They can carry heavy load, move on uneven terrains and have various sensors and cameras fitted on them.
Technical Details of Final DeliverableDesign Chassis And Hardware For Robot We will design chassis for our robot which support our circuit to make that robot’s functionality Happen. Design Software To integrate with Hardware We will design a software which will be based on android environment and will be run on android devices, So that our Military Spying Robot get commands from it to control our Robot. Design Frequency Jammer We will design frequency jammer system for our robot which will also assembled in our spy robot to jam the frequency in a certain range.To test Spying and Disposable Bomb mechanism we will test these components: DC Motor Crystal Oscillator, Raspberry Pi,Resistors Capacitors,Transistors,Cables and Connectors Diodes PCB and Breadboards,LED,Push Buttons,Switch IC, IC Sockets,Wireless Pi Camera V2,Test Frequency Jammer System To test frequency jammer system, Using GPU for machine learning and data training, Robotic Arm Degree Of 4 (Nvidia GTX1050) which we are using in our spy robot following components will be test:
Final Deliverable of the Project HW/SW integrated systemCore Industry ITOther Industries Security Core Technology Internet of Things (IoT)Other Technologies RoboticsSustainable Development Goals Quality Education, Life on LandRequired Resources| Item Name | Type | No. of Units | Per Unit Cost (in Rs) | Total (in Rs) |
|---|---|---|---|---|
| Total in (Rs) | 78680 | |||
| Raspberry pi 3B+ | Equipment | 1 | 6500 | 6500 |
| 32 GB SD card | Equipment | 1 | 750 | 750 |
| Raspberry pi 4B 2GB ram | Equipment | 1 | 10000 | 10000 |
| L298N | Equipment | 2 | 220 | 440 |
| 12v 2.5A battery | Equipment | 2 | 470 | 940 |
| R-pi Camera 5mp/Vision | Equipment | 1 | 2300 | 2300 |
| Pen tilt servo motors | Equipment | 4 | 800 | 3200 |
| Robot Chasis | Equipment | 1 | 5000 | 5000 |
| Robotic Arm DO4 | Equipment | 1 | 4000 | 4000 |
| Metal Detector | Equipment | 1 | 1000 | 1000 |
| NVIDIA GTX 1050 | Equipment | 1 | 27800 | 27800 |
| jumper wires | Equipment | 110 | 5 | 550 |
| Power Bank | Equipment | 1 | 3000 | 3000 |
| Raspbery Pi power supply | Equipment | 3 | 300 | 900 |
| HDMI Converter | Equipment | 1 | 500 | 500 |
| Motors Battery | Equipment | 4 | 450 | 1800 |
| Petrol | Miscellaneous | 2 | 1500 | 3000 |
| Travelling & Shipments | Miscellaneous | 1 | 7000 | 7000 |