IOT based lab automation and power management System
?Implementation using IOT. ?Integration of wireless communication networking devices with the user to give access to whole system. ?Collaboration of different heterogeneous computing units for desired automation functionalities.
2025-06-28 16:33:36 - Adil Khan
IOT based lab automation and power management System
Project Area of Specialization Electrical/Electronic EngineeringProject Summary•Implementation using IOT.
•Integration of wireless communication networking devices with the user to give access to whole system.
•Collaboration of different heterogeneous computing units for desired automation functionalities.
Project ObjectivesThe objective of project is to implement low cost, reliable, and scalable lab automation that can be used remotely switch on or off any lab appliances.
Project Implementation MethodIot based lab automation, by sensors, using nodeMcu,
Benefits of the Project- Implemention of low cost, reliable, and scalable lab automation that can be used remotely switch on or off any lab appliances.
- Time saving project as there is no obligation to be present on the spot for its operation.
- Power saving project which makes it more preferable.
Automatic control of different loads in laboratory like fan, light, personal computer etc through sensors and internet of things. Sensors such as ultrasonic is used for human detection at a certain area with minimum distance of 30mm and LDR to determine resistivity of light falling on it. If the sunlight in certain area is sufficient for an eye, the load(tubelight) will remain turned off even after human detection in the particular area. Morever loads are automatically turned on or off from long distances using Esp8266 which is a wifi shield. It is programed with arduino uno to produce desired results.
Final Deliverable of the Project Hardware SystemCore Industry OthersOther IndustriesCore Technology Internet of Things (IoT)Other TechnologiesSustainable Development GoalsRequired Resources| Item Name | Type | No. of Units | Per Unit Cost (in Rs) | Total (in Rs) |
|---|---|---|---|---|
| Total in (Rs) | 20330 | |||
| arduino | Equipment | 1 | 800 | 800 |
| Nodemcu esp8266 | Equipment | 1 | 700 | 700 |
| relay board | Equipment | 2 | 350 | 700 |
| pir sensor | Equipment | 1 | 200 | 200 |
| connecting wires | Equipment | 1 | 200 | 200 |
| servo motor | Equipment | 1 | 250 | 250 |
| ldr | Equipment | 1 | 180 | 180 |
| ultrasonic | Equipment | 1 | 150 | 150 |
| breadboard | Equipment | 1 | 200 | 200 |
| pc | Equipment | 1 | 7000 | 7000 |
| fan | Equipment | 1 | 900 | 900 |
| light | Equipment | 1 | 1500 | 1500 |
| prototype | Miscellaneous | 1 | 7000 | 7000 |
| Extension | Equipment | 1 | 400 | 400 |
| vero board | Miscellaneous | 1 | 150 | 150 |