Iot based industry protection system

?Amongst the occurred disasters happened in the resident area, fires have been known as the dangerous tragedy that could cause destruction, property and life losses ? In many disasters, fires have become recurrent, destructive and most influential disasters if compared to others hazards. Wit

Project Title

Iot based industry protection system

Project Area of Specialization

Electrical/Electronic Engineering

Project Summary

•Amongst the occurred disasters happened in the resident area, fires have been known as the dangerous tragedy that could cause destruction, property and life losses

• In many disasters, fires have become recurrent, destructive and most influential disasters if compared to others hazards. With the rapid development of urban construction, the occurrence probability of the great fire and other special disaster also increased year by year.

• Fires in the early detection and early warning are two important ways to extinguish the fire promptly and avoid great casualties and property loss. Therefore, the requirement of placing intelligent fire alarm system is important within buildings especially in the buildings where contain many people inside or valuable belongings.

?

Project Objectives

?One of the major problems that security must deal with is the fire outbreak that can happen in everywhere including universities , houses , schools , factories and many other places, and to avoid that or to minimize the damage caused by fire outbreak an IOT technology is used to control such a kind of risk. I

?The main aim is to design a low cost and simple wireless protection system against fire outbreak and provide an early alarm system to avoid serious damaged due to this type of hazards.

?The new modern fire monitoring system is based on wireless sensor network in combination with Internet of Things. Because of modern advanced technology, the system minimize the losses due to fire. Sensors detects the fire condition and transfers the data to the system.  Fire brigade and building owners can do the interactions with the system.

?

?

Project Implementation Method

?In this section, we breakdown of our work into four parts. The first unit describes the sensors which collects the information from the environment and transmits it to the second unit, i.e., the processing unit, arduino uno The third unit is the Wi-Fi module communication unit, which alerts the users about the event. The fourth unit triggers the alarm.

?

Benefits of the Project

?After implementation of this project we can save human lives and many other valuable things in the industries

?A fire alert system reduces the probability of injury or loss of life and limits damage due to fire, smoke , heat and other factors.

Technical Details of Final Deliverable

IOT Based Fire Alerting System uses two Sensors, namely, Temperature and Smoke sensors. There is an ADC convertor, which converts the analog signals received at the sensor end to digital and then transmits them to the micro-controller, Arduino. The micro-controller is programmed to turn on the buzzer, when the temperature & the smoke and light reaches a threshold value.

Final Deliverable of the Project

HW/SW integrated system

Core Industry

Security

Other Industries

Education

Core Technology

Internet of Things (IoT)

Other Technologies

Robotics

Sustainable Development Goals

Good Health and Well-Being for People

Required Resources

If you need this project, please contact me on contact@adikhanofficial.com