IOT BASED HOME SURVEILLANCE SYSTEM
IOT or internet of things is an upcoming technology that allows us to control hardware devices through the internet. Here we propose to use IOT in order to control home appliances, thus automating modern homes through the internet. The main purpose of this project is to control any elec
2025-06-28 16:33:35 - Adil Khan
IOT BASED HOME SURVEILLANCE SYSTEM
Project Area of Specialization Internet of ThingsProject SummaryIOT or internet of things is an upcoming technology that allows us to control hardware devices through the internet. Here we propose to use IOT in order to control home appliances, thus automating modern homes through the internet.
The main purpose of this project is to control any electric supply equipment load through the Internet network over cloud remotely on the basic principle of the Internet of things (IOT). In this propose research work, the real-time scenario the electric load can be monitored as well as configured through web based application. The data sent from any password protected device through webpage. A Wi-Fi Module is configured with any nearby wireless modem to access internet. The received internet commands are fed to the Wi-Fi module.
In this propose module the Home Gateway is connected with Internet Service Provider (ISP). Internet Service Provider provide internet service to the Home Gateway. Home Gateway spread the Wi-Fi signal to connect Home appliances with internet. The program within the Wi-Fi Module execute the received commands based on which the electric load gets activated. The status of the electric load also will be displayed on the web page.
A Home Automation system that employs the integration of multi-touch mobile devices, cloud networking, wireless communication, and power-line communication to provide the user with remote control of various lights and appliances within their home. This system uses the internet, handheld wireless remote, and PC based program to provide a means of user interface to the consumer.
Project Objectives- Router
- Getway
- Mcu
- Led
- Isp
- Switches
- Sensors
- Fans
- Lights
- Server cloud
- VoIP Phones
- Smoke detector
- Pc’s
The main objective is to design and implement a control and monitor system for smart house. Smart house system consists of many systems that controlled by we using packet tracer simulation. Also, the smart house system was supported by remote control system as a sub controlling system. The system also is 4 connected to the internet to monitor and control the house equipment’s from anywhere in the world through cloud. We are implementing IPv4 in this and we are using this in hardware devices packet tracer software. It perform as like a real which we can design this in real world. We need ISP to connect with internet and we make a registration server in which every equipment which are using in home are register and we can control remotely.
Project Implementation MethodTotally our project is implemented through the hardware devices and packet tracer software, we have use the all electronic devices in the, ISP Cloud, WiFi Router, Motion Detector, Fire Sprinkler, Webcam, Smart Thermostat, ISP Routers and many other devices connected in this project which are helpful for the environment and lifesaving.
We have used Ipv4 to connect all the device through wireless system and have given to all the devices IP’s through the dhcp and connect these devices to the cloud.
Packet tracer is reliable software through every one can access easily and perform many task regarding to IoT and there are many other function in packet tracer good configuration.
Benefits of the Project- To save the electricity and reduce the human efforts.
- To decrease the risk factor of human life and maintain the security purpose.
- To maintain the home temperature, to save the time.
- Our data will be secure through the cloud computing huge storage of CCTV camera that’s why it loaded towards the cloud.
- At the first level the project planning, on the packet tracer means designation of all the project, after connected the real devices hardware base, and software base.
- Second step was that we performed some operation and steps on the devices, coding base and checks the error and able to work.
- Third step check the communication between the devices these are performing well or not.
- After checking testing was most important like on real devices and on the last the wired were connected to hardware which were connected to the project .
- In the last step was that we checked it on the distance means wireless system but it was performing well so we started to write the thesis.
| Item Name | Type | No. of Units | Per Unit Cost (in Rs) | Total (in Rs) |
|---|---|---|---|---|
| Total in (Rs) | 75920 | |||
| Home getway | Equipment | 1 | 5500 | 5500 |
| Cable modem | Equipment | 1 | 500 | 500 |
| Coaxial spliter | Equipment | 2 | 1500 | 3000 |
| Solar panel | Equipment | 1 | 5100 | 5100 |
| Fan | Equipment | 3 | 1000 | 3000 |
| AC | Equipment | 1 | 6000 | 6000 |
| Thermostate | Equipment | 2 | 1400 | 2800 |
| Lamp | Equipment | 4 | 1050 | 4200 |
| Siren Alrm | Equipment | 2 | 400 | 800 |
| Motion detector | Equipment | 3 | 500 | 1500 |
| Web Camera | Equipment | 2 | 5000 | 10000 |
| Fire Splinker | Equipment | 1 | 2500 | 2500 |
| Smoke Detector | Equipment | 2 | 2850 | 5700 |
| MCU board | Equipment | 1 | 420 | 420 |
| Appliance | Equipment | 1 | 6000 | 6000 |
| Lawn Splinker | Equipment | 1 | 1500 | 1500 |
| Carbon Monoxide Alrm | Equipment | 1 | 2500 | 2500 |
| Smart led | Equipment | 2 | 750 | 1500 |
| Cables and jumper cables | Equipment | 2 | 3000 | 6000 |
| Stationary | Miscellaneous | 2 | 1000 | 2000 |
| panaflex | Miscellaneous | 3 | 1100 | 3300 |
| printes | Miscellaneous | 10 | 150 | 1500 |
| Stand | Miscellaneous | 1 | 600 | 600 |