Adil Khan 1 year ago
AdiKhanOfficial #FYP Ideas

IOT Based Heart Monitoring System (ECG and PPG)

ECG is the first step to detecting the abnormality in the heart. It is very important to have a portable solution that can help people to get their ECG signals to analyze and consult with a doctor. In our project, We are not just dealing with ECG we are also working on PPG to check Blood Oxygen Satu

Project Title

IOT Based Heart Monitoring System (ECG and PPG)

Project Area of Specialization

Electrical/Electronic Engineering

Project Summary

ECG is the first step to detecting the abnormality in the heart. It is very important to have a portable solution that can help people to get their ECG signals to analyze and consult with a doctor. In our project, We are not just dealing with ECG we are also working on PPG to check Blood Oxygen Saturation Level and Heart Rate. Our project is also IOT based project that helps patients to send ECG signals to doctors and have a history of their ECGs on the internet.

Project Objectives

  1. To make IoT-based, accurate, portable, and low-cost ECG and PPG.
  2. The Device will be able to collect the ECG and PPG signal for further analysis/diagnostics.

Project Implementation Method

It is based on research and implementation like learning from any online source and implementing it in hardware and software according to our requirements. Learning from different sources like researching on the internet like if we are working on a microcontroller first we will learn about its syntax language then we will see its GPIOs., ADC, and then implement it on the board.

Benefits of the Project

  • Wireless monitoring and recording of patient's heart rate.
  • It Could be used at home 
  • Beneficial for people in Remote areas!
  • Avoidance of bacterial infection due to the use of multiple wires!

Technical Details of Final Deliverable

Final deliverable includes

Complete Embedded ECG device consists of microcontrollers like (ESP8232, Arduino, and STM) for collecting the data using ADC and doing further processing of the signal. The ECG and PPG data are being collected using sensors like AD8232 and Pulse Sensor. Our device also consists of a display screen and IOT support.

Final Deliverable of the Project

HW/SW integrated system

Core Industry

Health

Other Industries

Core Technology

Wearables and Implantables

Other Technologies

Internet of Things (IoT), Others

Sustainable Development Goals

Good Health and Well-Being for People, Life on Land

Required Resources

Item Name Type No. of Units Per Unit Cost (in Rs) Total (in Rs)
Microcontroller Board Equipment320006000
AD8232 Sensor Equipment230006000
Pulse Sensor Equipment215003000
Wi-Fi Module Equipment210002000
LCD Display Equipment11500015000
ECG Electrodes Equipment130003000
Bread Board Wires etc Miscellaneous 110001000
3D Printing Miscellaneous 150005000
Thermal Printer Equipment180008000
PCB Board Equipment110001000
PCB Design Printing Equipment12000020000
Total in (Rs) 70000
If you need this project, please contact me on contact@adikhanofficial.com
0
206
Design and Fabrication of Solar Tracking System

This project composses the optimum utilization of solar energy through the use of a dynami...

1675638330.png
Adil Khan
1 year ago
IOT based robot for monitoring and communication for coal miners

Pakistan is enriched with one of the natural resource "coal" that why we mostly depend on...

1675638330.png
Adil Khan
1 year ago
Massively Open Online Course System for Islamic Sciences

MOOC System for Quran-il-Hakeem version 2.0 is an upgraded version of the same software. I...

1675638330.png
Adil Khan
1 year ago
Temperature Reduction of photovoltaic panels by water cooling system

Our Project is related with Solar PV panel system?s efficiency As Plates of PV panel syste...

1675638330.png
Adil Khan
1 year ago
Design and Analytical Modeling Of Outer Rotor Flux Reversal Machine

The whole world is working on how to control global warming, climate change and other envi...

1675638330.png
Adil Khan
1 year ago