IOT BASED FOREST FIRE DETECTION
The main objective of this project is to make a fire detection system using Zigbee communication system. The hardware designed in this project will mostly be installed in the forest. The system consists of three main parts i-e Sensor Node, Main control Unit and Mobile Application. Sensor nodes are c
Project Title
IOT BASED FOREST FIRE DETECTION
Project Area of Specialization
Project Summary
The main objective of this project is to make a fire detection system using Zigbee communication system. The hardware designed in this project will mostly be installed in the forest. The system consists of three main parts i-e Sensor Node, Main control Unit and Mobile Application. Sensor nodes are consisting of temp, humidity sensors, Arduino and Zigbee modules. Sensor node after detecting the fire will transmit the signal to Main control unit. MCU consists of Zigbee module, Arduino and NodeMCU. After receiving the signal, the MCU will upload it to the cloud. Then the concerned person with the Mobile Application installed on his phone will get the notification of fire occurrence.
Project Objectives
- To detect the occurrences of fire in the forest as early as possible.
- By detecting the fire early 65% of the damage done by forest fire can be avoided.
- To reduce the use of man power in forest.
- To make a cost effective fire detection system.
Project Implementation Method
- Literature review
- Making mash-network of Zigbee communication protocol.
- Designing of Sensor Nodes.
- Designing of Main control Unit
- Making Mobile Application.
- Testing
Benefits of the Project
- It can detect fire and inform us in just seconds.
- Unlike other communication protocols Zigbee communication is very secure.
- Its cost effective.
- It is expandable.
- The modules used in this project can easily be replaced.
Technical Details of Final Deliverable
3 sensor nodes, 1 main control unit and a mobile application will be delivered at the end of the project. Temp, Humidity sensors, arduino and NodeMCU are the important parts used int hardware. The design will be scalable and can be upgraded as per desire.
Final Deliverable of the Project
Type of Industry
Technologies
Sustainable Development Goals
Required Resources
| Item Name | Type | No. of Units | Per Unit Cost (in Rs) | Total (in Rs) |
|---|---|---|---|---|
| Zigbee Modules | Equipment | 6 | 4500 | 27000 |
| sensors | Equipment | 10 | 100 | 1000 |
| Heat Sink | Miscellaneous | 10 | 70 | 700 |
| Capacitors | Equipment | 10 | 200 | 2000 |
| Resistors | Equipment | 20 | 10 | 200 |
| Arduino | Equipment | 5 | 700 | 3500 |
| NodeMCU | Equipment | 2 | 1000 | 2000 |
| Connecting Wires | Miscellaneous | 10 | 160 | 1600 |
| Solder Iron | Miscellaneous | 1 | 1500 | 1500 |
| Veroboard | Equipment | 5 | 100 | 500 |
| Total in (Rs) | 40000 |
If you need this project, please contact me on contact@adikhanofficial.com
smart and intelligent water trapping system based on IOTs in agricultu...
In this world, full of technology a new emerging technology IoT playing an important role...
IoT based Smart Drink Dispenser
The IoT-based Smart Drink Dispenser (iSDD) is a system that can be used for dispensing wat...
Thermal design of a Turbine for a 2.5 kVA Organic Rankine Cycle system
The electrical deficiency of Pakistan is one of the major concern. The organic Rankine cyc...
World Aquifer Forecasting Engine and Research
The rapid depletion of underground water reservoirs throughout the country is the biggest...