Adil Khan 1 year ago
AdiKhanOfficial #FYP Ideas

IoT based ATS for domestic generators

We are designing a ATS (auto transfer switch) system for domestic generators as an add-on module.Our system will be capable of auto start/stop operation of generator,auto load transfer between main utility supply and generator,recording the critical parameters of generator(voltage,current,temperatur

Project Title

IoT based ATS for domestic generators

Project Area of Specialization

Internet of Things

Project Summary

We are designing a ATS (auto transfer switch) system for domestic generators as an add-on module.Our system will be capable of auto start/stop operation of generator,auto load transfer between main utility supply and generator,recording the critical parameters of generator(voltage,current,temperature,oil level,fuel level) and showing this data on the mobile application via internet.Generator will also be able to take decision smartly depending upon the values of parameters(high temperature shutdown etc).

Project Objectives

Following are the objectives of the project:

  • To design the ATS system as an add-on module so it can enhance the functionality of generator wihtout making it difficult to use.
  • To provide the safety to its users from the hazards of manually switching the loads which can cause backfeed resulting in the damage of generator as well as wiring of the place it is being used at.
  • To provide hassle free use of generator in the case of power failure.
  • To increase the efficiency and life of the generator by monitoring its critical parameters.

Project Implementation Method

The first stage of implementation is the literature review,followed by the research on the components which will be used.Based on this, the implementation will be as follows,

  • Arduino is being used as the main controller along with ESP-01 module to communicate with internet.
  • Two detection circuits are being used to detect the status of the uitlity supply and generator supply.
  • Depending upon the availability of utlity supply,load will be transfered from utility to generator ad vice versa with the help of relays.
  • Temperature sensor,current sensor,voltage sensor,fuel level sensor and oil level sensor will sense the corresponding values and send these values to mobile application.
  • These parameters are constantly being monitored so that generator can be shutdown in case of any abnormality in the parameters.

Benefits of the Project

Following are the key benefits of the system:

  • Safety of the user by automating the operation of load transfer.
  • Hassle free automatic operation of ATS.
  • Real time data monitoring of generator.
  • Automatic generator shutdown in the case of abnormalities.

Technical Details of Final Deliverable

  • Automatic Start/Shutdown of generator
  • Automatic load transfer between Utility line and generator line
  • Automatic Shutdown in the case of high engine temperature
  • Real time monitoring of fuel level and temperature via Mobile Application
  • Low oil level indication via Mobile Application and shutdown
  • Switching between different loads connected to generator via Mobile
  • Automatic fuel switching from petrol to gas after startup of generator.

Final Deliverable of the Project

HW/SW integrated system

Core Industry

Others

Other Industries

Others

Core Technology

Internet of Things (IoT)

Other Technologies

Others

Sustainable Development Goals

Industry, Innovation and Infrastructure, Sustainable Cities and Communities

Required Resources

Item Name Type No. of Units Per Unit Cost (in Rs) Total (in Rs)
Generator Equipment14000040000
Controllers(Arduino and ESP-01) Equipment110001000
Sensors Equipment11000010000
Relays Equipment120002000
Solenoid valves Equipment125002500
Small electronic components Equipment130003000
PCB fabrication Equipment170007000
Miscellaneous Miscellaneous 125002500
System Enclosure Equipment120002000
Total in (Rs) 70000
If you need this project, please contact me on contact@adikhanofficial.com
0
192
DocScout

DocScout is based on a Healthcare platform specifically developed for global healthcare ma...

1675638330.png
Adil Khan
1 year ago
Development of environmental friendly indigenous compressed stabilized...

Earth being available abundantly has invariably been the main construction material in pro...

1675638330.png
Adil Khan
1 year ago
DESIGN AND FABRICATION OF AUTOMATIC BOTTLE FILLING MACHINE

Automated bottle filling machine is designed and fabricated for filling and capping proces...

1675638330.png
Adil Khan
1 year ago
Multiple induction motor stater using liquid rheostat

In our project we are using liquid starter for controlling the increased amount of current...

1675638330.png
Adil Khan
1 year ago
Bus Tracking Application

 The main purpose of this Android mobile phone application is to ...

1675638330.png
Adil Khan
1 year ago