Hybrid Bike

Project Title

Hybrid Bike

Project Area of Specialization Electrical/Electronic EngineeringProject Summary

AUTO HYKE
                               (HYBRID BIKE)
We are applying MIDDLE WAY term of enginnering in our projects we find the way in which we  cover the flaws of IGCT Engines Bikes and Electric Bike and made a new innovation for public that will also bring new wave in  Rider's lives 

AUTO HYKE  is the combination of IGCT Engine and Electric Bike and doing AUTOMATIC SWITCHING. When our battery charging is low from some limit  bike mode will automatically switch to engine mode

Project Objectives

1. Reduce pollution Enviornment.
2.  More efficient according to the conditions of countries like us.
3. Upgrade  Rider's Lifestyle.
4. Remove the Flaws of 2 Different modes of bike 
5. Automtic Switchng 
6. Protection against Battery explode due to over charging.
7. Fast charging by using smart charger

Project Implementation Method

First, we have imported BLDC Hub motor with complete kit, then after that we have started working on stablizing our battery cells and we have designed battery pack. We have connected our battery cells in series to get ouput of 60 Volts and 20 Ampere hour as our single cell's rating is 3.7 volts and 20Ampere hour and we connected a battery management system that will protect battery cells from over voltage and over current  .As the Hub motor  was 1500 Watts  and required 60V and 20Ah for it's operation.and we have used DC-DC converter to step down from 60 volts to 12Volts for other requirements(Head light, Indicators and self start motor supply) aftrewards we have designed successful power train and implemented in on bike and in the last we have designed a logical switch that ignites the engines as our battery percent falls to 20 %

Benefits of the Project

• Reduce Fuel Consumption which will make our Envirnment
•  Adding up the Efficiencies of both modes of HEV 
•  Automatic Switching according to Battery percentage 
• Fast charging 
• Safety insurance

Technical Details of Final Deliverable

our AUTO HYKE run on both petrol as well as electric source.In our Hybrid bike,we are using BLDC hub motor which is 85%  efficient and better than induction motor whose efficency is 50% we can switch it's mode automatically as well as manually.As our battery percentage falls to 20 % ,microcontroller will generate and send a signal to self start kit that will ignite the combustion engine.we are using lithium ion cells as it is one of the best energy- weight ratio,low self discharge rate and slow loss of charge when not in use.the smart charging system will completely charge the batteries with in 2.5 to 3 hours.We are using Battery management system ,it will monitor the temperature across the  batteries,open and closes various valves to maintain the temperature with in the narrow range to ensure optimal performance,it protects batteries from  over voltage and over current.To ensure the safety of person we are also using circuit breaker that will cutt off the supply in any emergency situation. 

Final Deliverable of the Project Hardware SystemCore Industry TransportationOther Industries Manufacturing Core Technology Clean TechOther Technologies OthersSustainable Development Goals Good Health and Well-Being for People, Industry, Innovation and Infrastructure, Partnerships to achieve the GoalRequired Resources

Item Name	Type	No. of Units	Per Unit Cost (in Rs)	Total (in Rs)
			Total in (Rs)	76302
HUB MOTOR	Equipment	1	20000	20000
Motor driver	Equipment	1	5000	5000
Battery charger	Equipment	1	4000	4000
Batteries	Equipment	16	1800	28800
BMS	Equipment	1	3000	3000
self start kit	Equipment	1	5500	5500
Battery pack design	Miscellaneous	1	2500	2500
Axle extension	Miscellaneous	1	1500	1500
electric wiring	Miscellaneous	1	1200	1200
Electric throttle	Equipment	1	500	500
spray paint	Miscellaneous	1	1000	1000
battery pack holder	Miscellaneous	1	1802	1802
DC-DC converter	Equipment	1	1500	1500