Hi-Performance Walk through Multizone Detector for preventing entrance of person having symptoms of COVID-19

Project Title

Hi-Performance Walk through Multizone Detector for preventing entrance of person having symptoms of COVID-19

Project Area of Specialization Electrical/Electronic EngineeringProject Summary

This project contains which along with a sensing temperature and metal detector and this project will be monitored by using IOT based monitoring systems. In this project we used increased temperature is a sign of a possible . Protect your employees with our personnel access control system with a temperature measurement and metal detector! When passing the detector, the temperature is measured without contact by infrared camera or sensor. If it higher than 37.3centigrade (or either another temperature) the detector gives an alarm. This happens in less than half a second, our project based on nowadays current situation is covid-19. So the project works our let’s suppose take a common example we lots of human life lost in last year and that current situation day by day, so that the we lost life safe and also protect our buddies and our society and or new generation, we take lot of benefits in one booth, our project is mostly use in and factory and hotels and airports and and when the peoples and so much peoples are collects in one hall and jalsa so the we take a more risk our life so the project we on the main gate and automatic peoples save and safe the life ,this is the most important benefits our project, let’s suppose covid-19 issue is end, so we take any other benefits our project human body temperature and verify a person and then entre the person if a person is not verify  then the not enter the hall automatic lights on red or green.

This project contains which along with a sensing temperature and metal detector and this project will be monitored by using IOT based monitoring systems.

In this project we used increased temperature is a sign of a possible . Protect your employees with our personnel access control system with a temperature measurement and metal detector! When passing the detector, the temperature is measured without contact by infrared camera or sensor. If it higher than 37.3centigrade (or either another temperature) the detector gives an alarm. This happens in less than half a second, our project based on nowadays current situation is covid-19. So the project works our let’s suppose take a common example we lots of human life lost in last year and that current situation day by day, so that the we lost life safe and also protect our buddies and our society and or new generation, we take lot of benefits in one booth, our project is mostly use in and factory and hotels and airports and and when the peoples and so much peoples are collects in one hall and jalsa so the we take a more risk our life so the project we on the main gate and automatic peoples save and safe the life ,this is the most important benefits our project, let’s suppose covid-19 issue is end, so we take any other benefits our project human body temperature and verify a person and then entre the person if a person is not verify  then the not enter the hall automatic lights on red or green.

Project Objectives

COVID-19 Pandemic is current issue nowadays so we merge these concepts to create Smart Security Booth Detector (SSBD) to secure our lives. To design secure Booth detector with mask detection and thermal imaging To design the advance system in that way to protect that security guard if someone is positive. To interface IOT based software project for real time monitoring.

• COVID-19 Pandemic is current issue nowadays so we merge these concepts to create Smart Security Booth Detector (SSBD) to secure our lives.
• To design secure Booth detector with mask detection and thermal imaging
• To design the advance system in that way to protect that security guard if someone is positive.
• To interface IOT based software project for real time monitoring.

Project Implementation Method

1st Step: temperature Head to Toe with thermal imaging process. Alarm value adjustable (suggest 37.3centigrade). If the temperature Extremely high sensitive so Alarm will be turn on 2nd Step: Mask Detection of person and it will detect the person who wear the mask or not if mask will not wear it so buzzer will turn on. 3rd Step: It will sanitize the person. In this application a DC motors turn on by sensors then it starts the process with in few seconds.

4th Step: After this the person will be recognize by itself through RF Id reader and this will work contactless. In the end it will give green signal to authorized person and the barrier will open for them.

1st Step:

temperature Head to Toe with thermal imaging process. Alarm value adjustable (suggest 37.3centigrade). If the temperature Extremely high sensitive so Alarm will be turn on

2nd Step:

Mask Detection of person and it will detect the person who wear the mask or not if mask will not wear it so buzzer will turn on.

3rd Step:

It will sanitize the person. In this application a DC motors turn on by sensors then it starts the process with in few seconds.

4th Step:

After this the person will be recognize by itself through RF Id reader and this will work contactless. In the end it will give green signal to authorized person and the barrier will open for them.

Benefits of the Project

At this current situation many alternative sources are available but behind of this source. We can provide cheap concept in reasonable price and we can take all advantages in one system.

Reliability: This project used for public environments, where safety is important for others. In particular, since this project is used IOT that has a wide service domain, reliable safety is necessary for each other. Therefore, the Smart Security Booth Detector based on networking, monitoring and human interaction.

Mobility: For high level of mobility, this project operates with IOT networking instead of the manual operation, the mobility of the proposed system is secured.

Service Continuity: In our project, IoT with a wide service domain, data exchanges and services should be conducted seamlessly at any time.

User Friendly: The project provide real time monitoring for user convinces. 

Technical Details of Final Deliverable

Prepare a circuit with an overheating prevention alarm and implement other safety measure to ensure safe operation in the event of a measure safe operation in the event of a malfunction may result in a serious accident. This project has been developed considering the need for low cost. Walk through Booth Walk through booth is that things in which someone is cross then automatic booth are sensing. Thermal Image Camera Thermal image camera is that in which when body is saw temperature is automatic detect head to toe. 3. RF ID Reader      When any employee or student or other personal id card punch then clarify the  student           or employee or other person then show the details. 4. Mask Detection Camera Mask detect camera is that one when someone hasn’t wear face mask then show that person is not enter. 5. Arduino Nano V3     Arduino Nano v3 its control is all function and system. 6.Buzzer, Alarm lights Buzzer alarm lights is that things in which those people temperature or  high ,low   then buzzer is create sound and also show lights Red and Green. 7.Sanitizer components  Sanitizer is that when person enter the booth then automatic sanitize and also kills bacteria our whole body.

Prepare a circuit with an overheating prevention alarm and implement other safety measure to ensure safe operation in the event of a measure safe operation in the event of a malfunction may result in a serious accident. This project has been developed considering the need for low cost.

1. Walk through Booth

Walk through booth is that things in which someone is cross then automatic booth are sensing.

1. Thermal Image Camera

Thermal image camera is that in which when body is saw temperature is automatic detect head to toe.

3. RF ID Reader

     When any employee or student or other personal id card punch then clarify the  student           or employee or other person then show the details.

4. Mask Detection Camera

Mask detect camera is that one when someone hasn’t wear face mask then show that person is not enter.

5. Arduino Nano V3

    Arduino Nano v3 its control is all function and system.

6.Buzzer, Alarm lights

Buzzer alarm lights is that things in which those people temperature or  high ,low   then buzzer is create sound and also show lights Red and Green.

7.Sanitizer components

 Sanitizer is that when person enter the booth then automatic sanitize and also kills bacteria our whole body.

Final Deliverable of the Project HW/SW integrated systemCore Industry EducationOther Industries Medical , Health , Security Core Technology Internet of Things (IoT)Other Technologies Clean TechSustainable Development Goals Good Health and Well-Being for People, Decent Work and Economic Growth, Industry, Innovation and InfrastructureRequired Resources

COVID-19 Pandemic is current issue nowadays so we merge these concepts to create Smart Security Booth Detector (SSBD) to secure our lives. To design secure Booth detector with mask detection and thermal imaging To design the advance system in that way to protect that security guard if someone is positive. To interface IOT based software project for real time monitoring.