Health Monitoring System

Project Title

Health Monitoring System

Project Area of Specialization Electrical/Electronic EngineeringProject Summary

We see that many people having health problems and blood diseases in all over Baluchistan and especially in sui.Cases of losing life is maximum in backward areas of Baluchistan(Dera Bugti) because due to some problems such as(heart beat , blood diseases).Many people facing heart problem in backwards area of Baluchistan.Many patients having blood pressure issue and they don’t know what to do.In backward areas they don’t having any devices to check these problems at home and get any recommendations.we are making a solution of  these problems and give some recommendation that are helpful for people of those backward areas.

Project Objectives

the objectives of this project is as following; 

1. To make a device that measure heart beat , oxygen level and show recommendations.

2. To make a device that check blood pressure and show recommendations.

3. To make a smart device that measure the temperature of body.

Project Implementation Method

starting our project with going through the research papers finding out the previous researches done om the project.in this project we are using a four sensor such as blood pressure sensor , heat sensor and pusle oximeter sensor that measure the both heart beart and oxygen level in body. we connect these sensors with ardunio and lcd screen to diaplay the result of these sensor such as.

 Pulse Oximeter sensor:

 The pulse oximeter sensor is used to measure the heart beat and oxygen level of patient . The normal heart beat range is 70 to 100 beats per minute and blood oxygen normal level is higher than 95%. So by using this sensor we easily monitor the patients health.

 Heat sensor:

 Heat sensor is used to measure the temperature as the normal body temperature is 98 f and 37 c,  through heat sensor we easily measure body temperature.

blood pressure sensor:

bp sensor is used to measured the blood pressure of the body, the minimum and maximium bp of normal human body is 80 to 120.

Benefits of the Project

this project is very helpful in medical and health care system because through this device we easily get familiar with health  status such as:

• This health monitoring glove is useful in both city and villages areas.
• Health monitoring glove is very helpful for poor people.
• This project is helpful for both educated and uneducated people.
• Through this project we easily get the information regarding health at home.
• through this system doctors easily measure the patient health condition.

Technical Details of Final Deliverable

this  project is very helpful for backward areas of balochistan and many years continuously i observed that many people having health issue and losing their lives, because they did not now the treatments due to less of doctors in those areas. we are making a solution of  these problems and give some recommendation that are helpful for people of those backward areas.

Final Deliverable of the Project HW/SW integrated systemCore Industry HealthOther Industries Medical Core Technology OthersOther TechnologiesSustainable Development Goals Good Health and Well-Being for PeopleRequired Resources

Item Name	Type	No. of Units	Per Unit Cost (in Rs)	Total (in Rs)
			Total in (Rs)	28600
pulse sensor	Equipment	1	600	600
BP sensor	Equipment	1	10000	10000
heat sensor	Equipment	1	600	600
sp02 sesnor	Equipment	1	600	600
led display screen	Equipment	1	800	800
stationary	Miscellaneous	8	500	4000
printing	Miscellaneous	30	200	6000
wires and cables	Equipment	50	40	2000
Arduino	Equipment	1	2000	2000
electronics component( bread board , battery resistor )	Equipment	1	2000	2000
others	Miscellaneous	0	0	0