GSM based substation monitoring and controlling

In this era of wireless communication, monitoring and controlling of any system like substation is the way towards perfection or achieving maximum efficiency. Substation is part of power system in which voltage is transformed for transmission, distribution, and switching. To ensure reliable operatio

Project Title

GSM based substation monitoring and controlling

Project Area of Specialization

Electrical/Electronic Engineering

Project Summary

In this era of wireless communication, monitoring and controlling of any system like substation is the way towards perfection or achieving maximum efficiency. Substation is part of power system in which voltage is transformed for transmission, distribution, and switching. To ensure reliable operation in substation for continuous power supply, it is very essential to monitor and control parameters of substation by introducing automation level through mobile communication technology (GSM). Monitoring transmission parameters for faults and quick isolation of the system from faults helps to improve the efficiency of the power systems reliability. Current conventional method has its own limitations due to their reliance on technical team to carrying out visual inspection in order to identify any fault. The aim is to design system which continuously monitors the changes in transmission parameters such as voltage, current, temperature and frequency. Whenever they exceed predefined limits, send a text message to the concern person mobile number which was already programmed in Micro-controller through GSM and at the same instant operating the relay for protection.

Project Objectives

• Design a system which can monitor and control the voltage and current by using a GSM module.
• Modeling of system for different fault conditions.
•  Read and store the data  for Automatic switching of system according to requirement.
•  Transfer of information from monitoring end to control end with specific time delay.
•   To Reduce human interference.

Project Implementation Method

In our project there are two ends, slave and master. At slave end the controller efficiently communicate with the different sensors installed for monitoring of substation’s parameters such as voltage, current and temperature. Controller send information of parameters to master end with specific delay.  When parameters exceeds predefined values, controller take action by sending signal to ativate relay and also message from slave end is transmitted through GSM modem to master end . At master end there is centralized monitoring and this end can also inerupt manually when it desire like in case of switching load on feeder in under and over load condition. Parameters will display on LCD at both end and history of data will also maintained.

Benefits of the Project

• Through this project the substation become intelligent in the sense that it is able to transmit alerts and information and receive commands.
• minimize effects of fluctations in parameters of substation in case of fault.
• Protect expensive equipments from damage.
• Make continuity in power supply.
• Minimize the labor cost at substation.
•  Saves time.

Technical Details of Final Deliverable

At the end, we will provide a prototype which has ability to control and monitor the substation parameters and also provide centrazied monitoring at remote end and  complete simulation and PCB layout.

Final Deliverable of the Project

HW/SW integrated system

Core Industry

Others

Other Industries

Energy , Telecommunication

Core Technology

Artificial Intelligence(AI)

Other Technologies

Sustainable Development Goals

Industry, Innovation and Infrastructure, Responsible Consumption and Production

Required Resources

If you need this project, please contact me on contact@adikhanofficial.com