grid synchronized photovoltaic system
The aim of this project is to design a system that is cost effective and synchronize photovoltaic power and grid or and use them simultaneously. We will design an inverter that will convert the PV power to three phase supply. The device will monitor the parameters of both grid and the three pha
Project Title
grid synchronized photovoltaic system
Project Area of Specialization
Project Summary
The aim of this project is to design a system that is cost effective and synchronize photovoltaic power and grid or and use them simultaneously. We will design an inverter that will convert the PV power to three phase supply. The device will monitor the parameters of both grid and the three phase PV power. After monitoring the parameters of supplies, the device will synchronize. On the other hand, if there is no sunlight i.e. at night or during cloudy weather, then the system will switch on complete power from utility grid.
Project Objectives
To design a PV system
To design a cost effective three phase inverter
To design a system for synchronization of PV power with other AC power supplies.
To design a monitoring system for parameters of power from different supply sources
Project Implementation Method
The maximum power from the photovoltaic cell will be achieved by the method of Maximum Power Point Tracking (MPPT) because each PV system has a point at which current and voltage output from the PV result in the maximum power output.
The input power from the grid is three phase for commercial use. The device will track the parameters of the incoming signal from the grid and the modulated signal of MPPT will be synchronized with it. Now the synchronized signal can be used along with grid power.
The maximum power will be utilized to run the load from photovoltaic system. There are fluctuations in power demand due to varying load industry. To deal with these load fluctuations load, the propose system will draw power from the grid.
Benefits of the Project
Renewable energy source
Handle the maximum load on PV system in daytime
Low maintenance cost
System is recyclable and transferable.
Technical Details of Final Deliverable
Desired capacity of pv system
Three phase sine wave invertor.
Maximum power point tracking system
Synchronizer of PV system with the grid
Final Deliverable of the Project
Core Industry
Other Industries
Core Technology
Other Technologies
Sustainable Development Goals
Required Resources
| Item Name | Type | No. of Units | Per Unit Cost (in Rs) | Total (in Rs) |
|---|---|---|---|---|
| ir2110 | Equipment | 5 | 200 | 1000 |
| transistors | Equipment | 8 | 90 | 720 |
| acs172 | Equipment | 4 | 120 | 480 |
| capacitor | Equipment | 20 | 15 | 300 |
| inductor | Equipment | 5 | 200 | 1000 |
| resistor | Equipment | 30 | 5 | 150 |
| solar panels | Equipment | 5 | 9470 | 47350 |
| Total in (Rs) | 51000 |
If you need this project, please contact me on contact@adikhanofficial.com
Induction Heater
Induction is the most efficient method of heating available nowadays whether it?s related...
Inventory Management and Information System
This project is aimed at developing a web based application named Inventory Management Sys...
Smart Attendance and Monitoring System (SAMS)
Recording Student or employee attendance and monitoring each of them is not an easy task,...
Electric Go Kart
This project " Electric Go-Kart" will demonstrate the battery mechanism, assembling of mot...
Smart Attendance System
Smart Attendance System is Android and web-based application which will develop for daily...